ASTM D501-03

Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents

STANDARD published on 1.10.2003

Language
Format	Online Secure PDF - 125.00 USD Print design - 125.00 USD
Availability	IN STOCK
Price	125.00 USD excl. VAT
125.00 USD

The information about the standard:

Designation standards: ASTM D501-03
Note: WITHDRAWN
Publication date standards: 1.10.2003
SKU: NS-29501
The number of pages: 26
Approximate weight : 78 g (0.17 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D501-03 :

Keywords:

alkaline builder, borax, caustic soda, detergent, ignition loss, insoluble, particle size, phosphate, silicate, soda ash, turbidity, ICS Number Code 71.100.40 (Surface active agents)

Additional information

1. Scope

1.1 These test methods cover procedures for the sampling and chemical analysis of inorganic alkaline detergents.

1.2 The procedures appear in the following order:

Orthophosphate

	Sections
Caustic Soda:
Sampling
Total Alkalinity as Sodium Oxide (Na2O)
Sodium Hydroxide (NaOH)
Carbonate as Sodium Carbonate (Na2CO3)
Carbon Dioxide (CO2) by the Evolution Method
Soda Ash:
Sampling
Matter Volatile at 150 to 155C
Total Alkalinity as Sodium Carbonate (Na2CO3)
Sodium Bicarbonate (NaHCO3)
Sodium Bicarbonate (NaHCO3) by Potentiometric Titration
Matter Insoluble in Water
Apparent Density
Modified Soda (Sequicarbonate Type):
Sampling
Total Alkalinity as Sodium Oxide (Na2O)
Sodium Bicarbonate (NaHCO3) and Sodium Carbonate (Na 2CO3)
Matter Insoluble in Water
Sodium Bicarbonate:
Sampling
Sodium Bicarbonate, Sodium Carbonate, and Free Moisture
Matter Insoluble in Water
Sodium Metasilicate, Sodium Sesquisilicate and Sodium Orthosil- icate:
Sampling
Total Alkalinity as Sodium Oxide (Na2O)
Total Silica as SiO2
Sodium Metasilicate (Na2SiO35H 2O)
Sodium Sesquisilicate (3Na2O2SiO211H 2O)
Matter Insoluble in Water
Loss on Ignition of Sodium Sesquisilicate (3Na2O2SiO 2 11H2O)
Sodium Orthosilicate (Na4SiO4)
Trisodium Phosphate:
Sampling
Trisodium Phosphate (Na3PO4) Content and Phosphorus Pentoxide (P2O5)
Trisodium Phosphate Calculated as Na3PO412H 2O, Na3PO4 H2O, Na3PO4, and as P2O5
Total Alkalinity as Sodium Oxide (Na2O)
Matter Insoluble in Water
Tetrasodium Pyrophosphate:
Sampling
Tetrasodium Pyrophosphate(Na4P 2O7)
Matter Insoluble in Water
Loss on Ignition
Borax:
Sampling
Total Borate and Excess Alkalinity or Acidity
Matter Insoluble in Water
Sodium Triphosphate:
Sampling
Tritratable Na2O
Total P2O5:
Preferred Method
Alternative Method
pH Titration
Quantitative Separation and Measurement of Various Phosphates:
Reverse-Flow Ion-Exchange Chromatography (Preferred Method)
Paper Chromatographic Method
pH of 1 percent Solution
Turbidity
Temperature Rise
Sulfate
Ignition Loss
Matter Insoluble in Water
Particle Size

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to useMaterial Safety Data Sheets are available for reagents and materials. Review them for hazards prior to usage.

2. Referenced Documents

E70-24	Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
E1-14(2025)	Standard Specification for ASTM Liquid-in-Glass Thermometers
D1193-24	Standard Specification for Reagent Water
D459-16(2025)	Standard Terminology Relating to Soaps and Other Detergents

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.