ASTM D5450/D5450M-93(2000)

Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

STANDARD published on 1.1.2000

Language
Format	Online Secure PDF - 86.00 USD Print design - 86.00 USD
Availability	IN STOCK
Price	86.00 USD excl. VAT
86.00 USD

The information about the standard:

Designation standards: ASTM D5450/D5450M-93(2000)
Note: WITHDRAWN
Publication date standards: 1.1.2000
SKU: NS-31245
The number of pages: 8
Approximate weight : 24 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D5450/D5450M-93(2000) :

Keywords:

composite materials, filament winding, Poisson´s ratio, transverse modulus of elasticity, transverse tensile properties, tranverse tensile strength, tubes, ICS Number Code 83.140.20 (Laminated sheets)

Additional information

1. Scope

1.1 This test method determines the transverse tensile properties of wound polymer matrix composites reinforced by high-modulus continuous fibers. It describes testing of hoop wound (90°) cylinders in axial tension for determination of transverse tensile properties.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E1237-20	Standard Guide for Installing Bonded Resistance Strain Gages
D792-20	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
D5449/D5449M-22	Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
E4-24	Standard Practices for Force Calibration and Verification of Testing Machines
E6-25	Standard Terminology Relating to Methods of Mechanical Testing
E111-17(2025)e1	Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus (Includes all amendments and changes 12/11/2025).
E122-17(2022)	Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
E132-17(2025)e1	Standard Test Method for Poisson’s Ratio at Room Temperature (Includes all amendments and changes 12/11/2025).
E177-26a	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods (Includes all amendments and changes 5/14/2026).
D5448/D5448M-22	Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
E251-20a	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages (Includes all amendments and changes 8/7/2020).
D883-26b	Standard Terminology Relating to Plastics (Includes all amendments and changes 8/24/2026).
D2584-25	Standard Test Method for Ignition Loss of Cured Reinforced Resins
D2734-23	Standard Test Methods for Void Content of Reinforced Plastics
E456-13a(2022)e1	Standard Terminology Relating to Quality and Statistics (Includes all amendments and changes 4/16/2024).
D3171-22	Standard Test Methods for Constituent Content of Composite Materials
D5229/D5229M-20	Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
D3878-26	Standard Terminology for Composite Materials

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.