ASTM D5531-94(2003)

Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

STANDARD published on 10.5.2003

Language
Format	Online Secure PDF - 77.00 USD Print design - 77.00 USD
Availability	IN STOCK
Price	77.00 USD excl. VAT
77.00 USD

The information about the standard:

Designation standards: ASTM D5531-94(2003)
Note: WITHDRAWN
Publication date standards: 10.5.2003
SKU: NS-31573
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D5531-94(2003) :

Keywords:

color, color measurements, physical standards, product standard, ICS Number Code 87.020 (Paint coating processes)

Additional information

1. Scope

1.1 This guide covers three levels of physical product standards for color commonly used in the coatings industry, provides terminology to describe each level, and describes techniques for generating standards.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E1349-06(2022)	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45?:0? or 0?:45?) Geometry
SAE J1545	Recommended Practice for Instrumental Color Difference Measurement for Exterior Finishes, Textiles, and Colored Trim Available from Society of Automotive Engineers (SAE), 400 Commonwealth Dr., Warrendale, PA 15096-0001, http://www.sae.org.
E1347-06(2020)	Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
E1164-23	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
E805-22	Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
E430-23	Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
E308-22	Standard Practice for Computing the Colors of Objects by Using the CIE System
E284-25	Standard Terminology of Appearance
D4449-15(2021)	Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
D4086-18(2023)	Standard Practice for Visual Evaluation of Metamerism
D3134-15(2024)	Standard Practice for Establishing Color and Gloss Tolerances
D2244-25	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
D1729-22	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D823-18(2022)	Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
D523-25	Standard Test Method for Specular Gloss
D16-1989	Suggested Procedure for Development of Spill Prevention Control and Countermeasure (SPCC) Plans - (To Assist Conformance to Requirements of Title 40, Code of Federal Regulations, Part 112)
E1345-24	Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
E1331-15(2023)	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.