Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM D6164/D6164M-21
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
Translate name
STANDARD published on 1.12.2021
The information about the standard:
Designation standards: ASTM D6164/D6164M-21
Publication date standards: 1.12.2021
SKU: NS-1043990
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM D6164/D6164M-21 :
This specification covers Grades G (granule surfaced) and S (smooth surfaced) prefabricated bituminous sheet materials reinforced with polyester fabric and modified by styrene butadiene styrene (SBS) thermoplastic elastomer, intended for use in the fabrication of multiple ply roofing and waterproofing membranes. The sheet materials shall meet dimensional requirements such as thickness and net mass per unit area, as well as physical requirements such as peak load before and after heat conditioning, elongation at peak load, ultimate elongation, tear strength, low temperature flexibility, dimensional stability, compound stability, and granule embedment.
Keywords:
modified bituminous sheet, polyester reinforcement, styrene butadiene styrene (SBS), thermoplastic elastomer,, ICS Number Code 91.100.500 ()
Additional information
| 1. Scope | ||||||
|
1.1?This specification covers prefabricated modified bituminous sheet materials reinforced with polyester fabric as the primary reinforcement (see Note 1), with or without granules, which use styrene butadiene styrene (SBS) thermoplastic elastomer as the primary modifier and are intended for use in the fabrication of multiple ply roofing and waterproofing membranes. Note 1:?Many modified bituminous sheets are currently marketed
with polyester mat reinforced with glass yarns to improve
processing in the manufacture of the finished modified bitumen
product and to reduce distortions that may be introduced during
production. These glass yarns are typically a small percentage of
the reinforcement and do not contribute to the physical properties
of the finished product so much as to make these products be
classified by Specification D6162/D6162M.
1.2?This specification is intended as a material specification only. Issues regarding the suitability of the specific roof constructions or application techniques are beyond this scope. 1.3?The specified tests and property limits used to characterize the sheet materials are intended to establish minimum properties. In-place roof system design criteria, such as fire resistance, field strength, impact/puncture resistance, material compatibility, uplift resistance, and others, are factors beyond the scope of this material specification. 1.4?The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||
| 2. Referenced Documents | ||||||
|
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
