Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM D6251/D6251M-23
Standard Specification for Wood-Cleated Panelboard Shipping Boxes
Translate name
STANDARD published on 1.10.2023
The information about the standard:
Designation standards: ASTM D6251/D6251M-23
Publication date standards: 1.10.2023
SKU: NS-1160260
The number of pages: 18
Approximate weight : 54 g (0.12 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM D6251/D6251M-23 :
This specification covers the fabrication and closure of empty and full wood-cleated, hereafter referred to as wood-cleated, panelboard boxes. These boxes are intended for use as containers for domestic and overseas shipment of general materials and supplies. The box shall be classified according to box type: Type I; Type II; Type II; and Type IV. According to class: Class 1 and Class 2. According to style: Style A; Style A1; Style B; Style C through K. According to preservative treatment; Treatment A and Treatment B. And according to load type: Type 1; Type 2; and Type 3. Panels shall be fabricated by nailing, stapling, or gluing panelboard to cleats placed. Fastener component test, fastener test for securing cleats to panelboard panels; lateral resistance test; direct withdrawal resistance test; oxine copper preservative test; zinc napthenate preservative test; and preservative dryness test shall be performed to conform to the specified requirements.
Keywords:
box, cleat, cleated OSB, cleated plywood, container, fasteners, nails, OSB (oriented strand board), packaging, panel, panelboard, shipping container, skid, staples, wire stitches, wood,, ICS Number Code 55.160 (Cases. Boxes. Crates)
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
