ASTM D6630-01

Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance

STANDARD published on 10.1.2001

Language
Format	Online Secure PDF - 77.00 USD Print design - 77.00 USD
Availability	IN STOCK
Price	77.00 USD excl. VAT
77.00 USD

The information about the standard:

Designation standards: ASTM D6630-01
Note: WITHDRAWN
Publication date standards: 10.1.2001
SKU: NS-35949
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D6630-01 :

Keywords:

cyclical fatigue, dynamic puncture, felts, heat conditioning, moisture content, multiple ply, roofing membrane, single ply, static puncture, structural deck, temperature, thermal insulation, wind tear resistance, ICS Number Code 91.100.50 (Binders. Sealing materials)

Additional information

1. Scope

1.1 This guide lists test methods intended to establish a minimum level of performance for insulated roof membrane assemblies, and lists pertinent design guidelines and installation methods in a unified manner. Material tests and evaluations are included with and without roof insulation.

1.2 It is not possible to establish a precise correlation between laboratory tests on roof assemblies and natural weathering due to variations in geographical climate, design, material and installation.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents

D5849-07	Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
D5635-04	Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
E96/E96M-24a	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials (Includes all amendments and changes 11/20/2024).
ASCE-7	Minimum Design Loads for Buildings and Other Structures Available from American Society of Civil Engineers (ASCE), 1801 Alexander Bell Dr., Reston, VA 20191, http://www.asce.org.
ANSI/SPRI RP-4	Wind Design Guide for Ballasted Single Ply Roof Systems Available from American National Standards Institute and Single Ply Roofing Institute, 200 Reservoir St., Suite 309A, Needham, MA 02194.
D5602-98	Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
D2523-13	Standard Practice for Testing Load-Strain Properties of Roofing Membranes
D95-23e1	Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation (Includes all amendments and changes 10/25/2024).
D5019-07	Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
D5147-07	Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
D5601-94	Standard Test Method for Tearing Resistance of Roofing and Waterproofing Materials and Membranes
D4434-06	Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
D4637-08	Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
D4798-08	Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
D4799-08	Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.