We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
STANDARD published on 1.12.2013
Designation standards: ASTM D6932/D6932M-08(2013)
Note: WITHDRAWN
Publication date standards: 1.12.2013
SKU: NS-37053
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
asphalt cement, asphalt rubber, modified asphalt cement, open-graded friction course, ICS Number Code 93.080.20 (Road construction materials)
Significance and Use | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
4.1 This guide provides information to assist engineers with the design requirements and construction guidelines for paving an Open-Graded Friction Course (OGFC) surface layer. An OGFC is primarily used to improve the skid resistance and wear resistance of a bituminous pavement by providing an escape route for surface water beneath a moving wheel load. The mixture is typically produced with a low amount of fine aggregate particles and high air void content to provide a passageway of interconnected voids for moisture to drain away from the travelway. The film thickness of the asphalt and overall asphalt content is important for better stripping resistance and durability and aging properties. 1.1 This guide covers the
construction of bituminous open-graded friction course plant
mixtures. End-use specifications should be adopted to conform to
job and user requirements. Where applicable, Specification D3666
should be applied as a minimum for agencies testing and inspecting
road and paving materials.
1.2 Bituminous open-graded friction courses are placed as the final wearing course for highways and airfields. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Historical
15.8.2011
Historical
1.12.2007
Historical
1.12.2009
Historical
15.9.2007
Historical
1.11.2009
Historical
1.1.2012
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
Latest update: 2024-05-15 (Number of items: 2 900 316)
© Copyright 2024 NORMSERVIS s.r.o.