ASTM D7166-10(2015)

Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels

STANDARD published on 1.6.2015

Language
Format	PDF - Immediate download - 75.00 USD Print design - 75.00 USD
Availability	IN STOCK
Price	75.00 USD excl. VAT
75.00 USD

The information about the standard:

Designation standards: ASTM D7166-10(2015)
Note: WITHDRAWN
Publication date standards: 1.6.2015
SKU: NS-609979
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Gaseous fuels

Annotation of standard text ASTM D7166-10(2015) :

Keywords:
at-line monitor, continuous fuel monitor, on-line monitor, total sulfur,, ICS Number Code 75.160.30 (Gaseous fuels)

Additional information

Significance and Use

5.1 On-line, at-line, in-line and other near-real time monitoring systems that measure fuel gas characteristics such as the total sulfur content are prevalent in the natural gas and fuel gas industries. The installation and operation of particular systems vary on the specific objectives, contractual obligations, process type, regulatory requirements, and internal performance requirements needed by the user. This protocol is intended to provide guidelines for standardized start-up procedures, operating procedures, and quality assurance practices for on-line, at-line, in-line and other near-real time total sulfur monitoring systems.

1. Scope

1.1 This practice is for the determination of total sulfur from volatile sulfur-containing compounds in high methane or hydrogen content gaseous fuels using on-line/at-line instrumentation.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D1070-03(2017)	Standard Test Methods for Relative Density of Gaseous Fuels
D1072-23	Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
D3764-23	Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
D4298-22	Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
D4468-23	Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
D5287-08	Standard Practice for Automatic Sampling of Gaseous Fuels
D5453-19a	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence (Includes all amendments and changes 8/13/2019).
D5503-94(1999)	Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
D5504-20	Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
D6122-23	Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
D6299-23a	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance (Includes all amendments and changes 12/12/2023).
D6621-21	Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
D3609-22	Standard Practice for Calibration Techniques Using Permeation Tubes
D6667-21	Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
D3246-15	Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry (Withdrawn 2024)
D6920-13	Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection (Withdrawn 2018)
ISO 7504	Gas Analysis-Vocabulary

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.