We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method (Includes all amendments and changes 6/3/2022).Translate name
STANDARD published on 1.5.2022
Designation standards: ASTM D7778-15(2022)e1
Publication date standards: 1.5.2022
The number of pages: 10
Approximate weight : 30 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM
calibration, ILS, interlaboratory study, precision, repeatability, reproducibility, ruggedness test,, ICS Number Code 75.080 (Petroleum products in general)
|Significance and Use|
5.1All ASTM standard test methods are required to include statements on precision and bias. To obtain such data it is necessary to conduct an interlaboratory study. This document is designed to provide a brief overview of the steps necessary in an ILS and to suggest an appropriate sequence in carrying out these steps.
5.1.1Qualitative tests such as Test Method copper corrosion may not require an ILS.
1.1This guide describes the procedures for planning and conducting an interlaboratory study (ILS) of a test method used in Petroleum Products and Lubricants Committee D02 of ASTM for the purpose of estimating repeatability and reproducibility of the test method in accordance with ASTM Form and Style requirements.
1.2This guide is concerned with the management of the ILS and intended to provide guidance for the planning stage and ensure the process, logistics, and tools are identified and agreed upon in advance.
1.2.1Selection of the samples and the impact of sample selection on the final scope of the test methodboth the range of materials covered in the scope and precision sections and the measurement range covered in the precision sectionare important, and careful consideration needs to be given to these aspects before an ILS is launched.
1.3This guide does not concern itself with the development of test methods but rather with gathering the information needed for a test method precision statement.
1.4This guide is concerned with test methods which yield a single numerical figure as the test result, although the single figure may be the result of a calculation from a set of measurements.
1.5This guide is designed for tests of properties that are stable, such that bulk samples can be homogenized and sub-samples can be prepared that will be identical and stable for the duration of the ILS testing period. This guide is not designed for unstable properties or for properties that make it difficult to obtain stable, representative samples for an ILS conducted at multiple laboratory sites.
1.6This guide represents the suggested practices for a typical precision study. Individual subcommittees may modify this approach as their expertise directs.
1.7This guide is voluntary, and thus, is not required for an approved precision study.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
|2. Referenced Documents|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2022-12-02 (Number of items: 2 643 927)
© Copyright 2022 NORMSERVIS s.r.o.