We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography
Translate name
STANDARD published on 1.11.2021
Designation standards: ASTM D7922-21
Note: WITHDRAWN
Publication date standards: 1.11.2021
SKU: NS-1043815
The number of pages: 8
Approximate weight : 24 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
antifreeze, ethylene glycol, gas chromatography, glycol, headspace, in-service oil, lubricating oil,, ICS Number Code 75.100 (Lubricants, industrial oils and related products)
Significance and Use | ||||||||
5.1?Some glycol/antifreeze dilution of in-service engine oil is normal under typical operating conditions. However, excessive glycol dilution can lead to decreased performance, premature wear, or sudden engine failure. This test method provides a means of quantifying the level of glycol based antifreeze dilution, allowing the user to take necessary action. |
||||||||
1. Scope | ||||||||
1.1?This test method covers the determination of glycol based antifreeze for in-service engine oil by derivative headspace/gas chromatography. 1.2?Sample is derivatized in-situ directly in a headspace sampling vial prior to vapor phase extraction and injection into a gas chromatograph. 1.3?The chemistry of the derivatization is unique to the detection of the molecules of ethylene glycol and 1,2-propylene glycol. 1,3-propylene glycol could also be detected but is not used in any known anti-freeze at this time. Other coolant analyses are beyond the scope of this test method. 1.4?The derivatization process does not affect glycol breakdown products such as glycolate and formate and hence the presence of these compounds in the oil will not be quantified. 1.5?The test method concentration range is from 50 ?g/g to 1000 ?g/g. Lower levels are possible by method modifications. Higher levels are possible through sample dilution. 1.6?UnitsThe values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||
2. Referenced Documents | ||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2025-05-12 (Number of items: 2 199 201)
© Copyright 2025 NORMSERVIS s.r.o.