We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography (Includes all amendments And changes 2/5/2021).
Automatically translated name:
Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
STANDARD published on 1.12.2015
Designation standards: ASTM D8003-15a
Note: WITHDRAWN
Publication date standards: 1.12.2015
SKU: NS-630392
The number of pages: 15
Approximate weight : 45 g (0.10 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
condensates, cut point interval, floating piston cylinders, light ends, light hydrocarbons, light hydrocarbon composition, live crude oil,, ICS Number Code 75.040 (Crude petroleum)
Significance and Use | ||||||||||||||||||
5.1 This test method determines methane (nC5.2 Equation of state calculations can be applied to variables provided by this method to allow for additional sample characterization. |
||||||||||||||||||
1. Scope | ||||||||||||||||||
1.1 This test method covers the determination of light hydrocarbons and cut point intervals by gas chromatography in live crude oils and condensates with VPCRNote 1: As described in Test Method D6377. 1.2 Methane (C1) to hexane (nC6) and benzene are speciated and quantitated. Samples containing mass fractions of up to 0.5 % methane, 2.0 % ethane, 10 % propane, or 15 % isobutane may be analyzed. A mass fraction with a lower limit of 0.001 % exists for these compounds. 1.3 This test method may be used for the determination of cut point carbon fraction intervals (see 3.1.2) of live crude oils and condensates from initial boiling point (IBP) to 391 °C (nC1.4 Dead oils or condensates sampled in accordance with 12.1 may also be analyzed. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5.1 Exception—Where there is no direct SI equivalent such as tubing size. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||
|
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
Latest update: 2024-05-03 (Number of items: 2 896 946)
© Copyright 2024 NORMSERVIS s.r.o.