Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine (Includes all amendments and changes 1/6/2021).Translate name
STANDARD published on 1.12.2020
Designation standards: ASTM D8316-20a
Publication date standards: 1.12.2020
The number of pages: 7
Approximate weight : 21 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM
coefficient of friction, EP additives, EP lubricants, lubricating oil, oscillation, roller, SRV, wear,
|Significance and Use|
5.1ï¿½This test method can be used to determine antiwear properties and coefficient of friction of EP lubricating oils at selected temperatures and loads specified for use in slip-rolling contacts in which high-speed vibrational or start-stop motions are present for extended periods of time under initial high Hertzian line contact pressures. It has found application as a screening test for lubricants used in gears, rolling bearings or cam/follower systems. Users of this test method should determine whether results correlate with field performance or other applications. In comparison to the ball-on-disk geometry as per Test Method , the initial contact pressure is better retained over test time in this roller-on-disk geometry.
1.1ï¿½This test method covers an extreme pressure (EP) lubricating oilâ€™s coefficient of friction and its ability to protect against wear when subjected to high-frequency, linear oscillation motion. The test utilizes a roller-on-disc geometry, where the roller is inclined/deflected by 10ï¿½ to the oscillating movement. The procedure is identical to that described in DIN 51834, Part 4.
1.2ï¿½This test method can also be used to determine the ability of a non-EP lubricating oil to protect against wear and its coefficient of friction under similar test conditions.
1.3ï¿½The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4ï¿½This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5ï¿½This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2021-04-19 (Number of items: 2 441 306)
© Copyright 2021 NORMSERVIS s.r.o.