We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear TestTranslate name
STANDARD published on 1.1.2021
Designation standards: ASTM D8337/D8337M-21
Publication date standards: 1.1.2021
The number of pages: 14
Approximate weight : 42 g (0.09 lbs)
Country: American technical standard
Category: Technical standards ASTM
bond, composite materials, pultruded (shop-fabricated) FRP composite, single-lap shear test, wet lay-up FRP composite,
|Significance and Use|
5.1This test method is intended for use in a laboratory setting.
5.2This test method is used to evaluate the plateau force Ppl that an FRP composite can bear before complete debonding from a concrete prism.
5.3The evaluation of the plateau force is intended to be made under consistent environmental conditioning and the tests conducted in ambient laboratory or otherwise consistent environmental conditions.
5.4This test can be used to determine the effective bond length 5.5This test can be used to determine the variation of the bond capacity with the bonded width bf if different bonded widths are tested while the bonded length is constant and greater than the effective bond length leff.
5.6This test is used to obtain the plot of the applied force versus loaded end (or global) slip of the composite with respect to the substrate. The loaded end slip is the average of two linear variable differential transformer (LVDT) readings, as described in . The plot obtained is used to determine the bond properties of the system.
5.7This test method can also serve as a means for uniformly preparing and testing standard specimens suitable for being subject to environmental conditioning and subsequently used to evaluate FRP-bonded-to-concrete system performance, and evaluating and reporting the results. The comparison of results from this test method conducted on identical specimens subject to different environmental conditioning protocols can be used to evaluate the effects of environmental exposure on the bond performance of FRP systems.
1.1This test method describes the apparatus and procedure to evaluate the lap shear bond properties of wet lay-up or shop-fabricated (for example, pultruded) fiber-reinforced polymer (FRP) composite systems adhesively applied to a flat concrete substrate. The test determines the plateau force that an FRP system can bear before complete debonding from a concrete prism tested using a direct single-lap shear test. This plateau force is reported as bond capacity and may be different from the maximum applied force. The plateau force is then used to determine the interfacial fracture energy and the cohesive material law.
1.2This test method is not intended for job approval or for product qualification purposes unless an external agency adopts the test method for those purposes.
1.3This test method is intended for use with adhesive-applied or wet lay-up FRP systems and is appropriate for use with FRP systems having any ?ber orientation or combination of ply orientations comprising the FRP composite, although the test condition only considers forces in the direction parallel to the prism longitudinal axis.
1.4UnitsThe values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
1.4.1Within the text, the inch-pound units are shown in brackets.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2022-11-27 (Number of items: 2 642 910)
© Copyright 2022 NORMSERVIS s.r.o.