Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3
STANDARD published on 1.12.2012
Designation standards: ASTM E1415-91(2012)
Publication date standards: 1.12.2012
The number of pages: 11
Approximate weight : 33 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM
aquatic plants, aquatic toxicity testing, duckweed, Lemna gibba, ICS Number Code 11.100.01 (Laboratory medicine in general)
|Significance and Use|
5.1 The term duckweed commonly refers to members of the family Lemnaceae. This family has many species world-wide in 4 genera. This guide is designed for toxicity testing with one particular clone of one species of duckweed that has been extensively studied, Lemna gibba G3, although other species such as Lemna minor or Spirodela spp. can probably also be tested using the procedures described herein.
5.2 Duckweeds are widespread, free-floating aquatic plants, ranging in the world from tropical to temperate zones. Duckweeds are a source of food for waterfowl and small animals and provide food, shelter, and shade for fish. The plants also serve as physical support for a variety of small invertebrates. Duckweed is fast growing and reproduces rapidly compared with other vascular plants (1).3 Under conditions favorable for its growth, it can multiply quickly and form a dense mat in lakes, ponds, and canals, primarily in fresh water, but also in estuaries. It also grows well in effluents of wastewater treatment plants and has been suggested as a means of treating wastewaters 5.3 Duckweed is small enough that large laboratory facilities are not necessary, but large enough that effects can be observed visually.
5.4 Because duckweed is a floating macrophyte, it might be particularly susceptible to surface active and hydrophobic chemicals that concentrate at the air-water interface. Results of duckweed tests on such chemicals, therefore, might be substantially different from those obtained with other aquatic species.
5.5 Results of toxicity tests with duckweed might be used to predict effects likely to occur on duckweed in field situations as a result of exposure under comparable conditions.
5.6 Results of tests with duckweed might be used to compare the toxicities of different materials and to study the effects of various environmental factors on results of such tests.
5.7 Results of tests with duckweed might be an important consideration when assessing the hazards of materials to aquatic organism (see Guide E1023) or when deriving water quality criteria for aquatic organisms (4).
5.8 Results of tests with duckweed might be useful for studying biological availability of, and structure-activity relationships between test materials.
5.9 Results of tests with duckweed will depend on temperature, composition of the growth medium, condition of the test organisms, and other factors. The growth media that are usually used for tests with duckweed contain concentrations of salts, minerals, and nutrients that greatly exceed those in most surface waters.
1.1 This guide describes procedures for obtaining laboratory data concerning the adverse effects of a text material added to growth medium on a certain species of duckweed (1.2 Special needs or circumstances might also justify modification of this standard. Although using appropriate procedures is more important than following prescribed procedures, results of tests conducted using unusual procedures are not likely to be comparable to results of many other tests. Comparison of results obtained using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting tests with duckweed.
1.3 The procedures in this guide are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications these procedures can be used to conduct tests on temperature and pH and on such other materials as aqueous effluents (see also Guide E1192), leachates, oils, particulate matter, sediments and surface waters. These procedures do not specifically address effluents because to date there is little experience using duckweeds in effluent testing and such tests may pose problems with acclimation of the test organisms to the receiving water. Static tests might not be applicable to materials that have a high oxygen demand, are highly volatile, are rapidly biologically or chemically transformed in aqueous solution, or are removed from test solutions in substantial quantities by the test chambers or organisms during the test.
1.4 Results of toxicity tests performed using the procedures in this guide should usually be reported in terms of the 7-day IC50 based on inhibition of growth. In some situations it might only be necessary to determine whether a specific concentration unacceptably affects the growth of the test species or whether the IC50 is above or below a specific concentration. Another end point that may be calculated is the no observed effect concentration (NOEC).
1.5 The sections of this guide appear as follows:
1.6 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and to
determine the applicability of regulatory limitations prior to use.
IEEE/ASTM SI 10 American National Standard for Use of the
International System of Units (SI): The Modern Metric System Terminology Relating to Biological
Effects and Environmental Fate Guide for Assessing the Hazard of a
Material to Aquatic Organisms and Their Uses Guide for Conducting Acute Toxicity Tests
on Aqueous Ambient Samples and Effluents with Fishes,
Macroinvertebrates, and Amphibians Guide for Conducting Static Toxicity
Tests with Microalgae Guide for Conducting Acute Toxicity Tests
on Test Materials with Fishes, Macroinvertebrates, and
IEEE/ASTM SI 10
American National Standard for Use of the International System of Units (SI): The Modern Metric System
Terminology Relating to Biological Effects and Environmental Fate
Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses
Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians
Guide for Conducting Static Toxicity Tests with Microalgae
Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2021-04-19 (Number of items: 2 441 306)
© Copyright 2021 NORMSERVIS s.r.o.