ASTM E1473-03

Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

STANDARD published on 1.12.2003

Language
Format	Online Secure PDF - 125.00 USD Print design - 125.00 USD
Availability	IN STOCK
Price	125.00 USD excl. VAT
125.00 USD

The information about the standard:

Designation standards: ASTM E1473-03
Note: WITHDRAWN
Publication date standards: 1.12.2003
SKU: NS-41874
The number of pages: 38
Approximate weight : 114 g (0.25 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM E1473-03 :

Keywords:

atomic, absorption, chemical analysis, gravimetric, ion exchange, photometric, titration

Additional information

Significance and Use

These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications, particularly those under the jurisdiction of ASTM Committee B-2 on Nonferrous Metals and Alloys. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E 882.

1. Scope

1.1 These test methods describe the chemical analysis of nickel, cobalt, and high-temperature alloys having chemical compositions within the following limits:

Element	Concentration Range, %
Aluminum	0.005 to 7.00
Beryllium	0.001 to 0.05
Boron	0.001 to 1.00
Calcium	0.002 to 0.05
Carbon	0.001 to 1.10
Chromium	0.10 to 33.00
Cobalt	0.10 to 75.00
Copper	0.01 to 35.00
Iron	0.01 to 50.00
Lead	0.001 to 0.01
Magnesium	0.001 to 0.05
Manganese	0.01 to 3.0
Molybdenum	0.01 to 30.0
Niobium (Columbium)	0.01 to 6.0
Nickel	0.10 to 98.0
Nitrogen	0.001 to 0.20
Phosphorus	0.002 to 0.08
Sulfur	0.002 to 0.10
Silicon	0.01 to 5.00
Tantalum	0.005 to 1.00
Tin	0.002 to 0.10
Titanium	0.01 to 5.00
Tungsten	0.01 to 18.00
Vanadium	0.01 to 3.25
Zinc	0.001 to 0.01
Zirconium	0.01 to 2.50

1.2 The test methods in this standard are contained in the sections indicated as follows:

	Sections

Aluminum, Total by the 8-Quinolinol Gravimetric Method (0.20 to7.00 %)	62 to 69
Chromium by the Atomic Absorption Method (0.018 to 1.00 %)	100 to 109
Chromium by the Peroxydisulfate Oxidation-Titration Method(0.10 to 33.00 %)	110 to 118
Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 to75 %)	34 to 41
Cobalt by the Nitroso-R-Salt Photometric Method (0.10 to5.0 %)	42 to 51
Copper by Neocuproine Photometric Method (0.010 to 10.00 %)	52 to 61
Iron by the Silver Reduction Titrimetric Method (1.0 to 50.0 %)	127 to 134
Manganese by the Metaperiodate Photometric Method (0.05 to2.00 %)	8 to 17
Molybdenum by the Ion Exchange-8-Hydroxyquinoline Gravi-metric Method (1.5 to 30 %)	119 to 126
Molybdenum by the Photometric Method (0.01 to 1.50 %)	88 to 99
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to84.0 %)	70 to 77
Niobium by the Ion Exchange-Cupferron Gravimetric Method(0.5 to 6.0 %)	135 to 142
Silicon by the Gravimetric Method (0.05 to 5.00 %)	27 to 33
Sulfur by the Combustion-Iodate Titration Method (0.006 to0.1 %)	18 to 26
Tantalum by the Ion Exchange-Pyrogallol SpectrophotometricMethod (0.03 to 1.0%)	143 to 151
Tin by the Solvent Extraction-Atomic Absorption Method (0.002to 0.10 %)	78 to 87

1.3 Methods for the determination of several elements not included in these test methods can be found in Test Methods E 30, E 76, and E 1019.

1.4 Some of the concentration ranges given in are too broad to be covered by a single method, and therefore, these test methods contain multiple methods for some elements. The user must select the proper test method by matching the information given in the scope and interference sections of each test method with the composition of the alloy to be analyzed.

1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E 380 are also used.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7 and in special caution and warning paragraphs throughout these test methods.

2. Referenced Documents

E1938-13(2018)	Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
E2465-23	Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E2594-20	Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)
E2823-17	Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ISO 5725	Precision of Test Methods--Determination of Repeatability and Reproducibility for Inter-Laboratory Tests
E1917-13(2018)	Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
E173-93	Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997)
E350-23	Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E351-18	Standard Test Methods for Chemical Analysis of Cast Iron´All Types
E352-23	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E353-19e1	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (Includes all amendments and changes 2/23/2022).
E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
E882-10(2016)e1	Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory (Includes all amendments and changes 10/27/2017).
E1601-19	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
E1834-18	Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
E1835-14(2022)	Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
E1019-18	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E60-11(2022)e1	Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry (Includes all amendments and changes 6/29/2022).
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
D1193-06(2018)	Standard Specification for Reagent Water
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E50-17	Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.