Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature AlloysTranslate name
STANDARD published on 1.4.2016
Designation standards: ASTM E1473-16
Publication date standards: 1.4.2016
The number of pages: 37
Approximate weight : 111 g (0.24 lbs)
Country: American technical standard
Category: Technical standards ASTM
aluminum, chromium, cobalt, cobalt-base alloys, copper, high temperature alloys, iron, manganese, molybdenum, nickel, nickel-base alloys, niobium, silicon, sulfur, tantalum, tin,, ICS Number Code 77.120.40 (Nickel, chromium and their alloys)
|Significance and Use|
4.1 These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications, particularly those under the jurisdiction of ASTM Committee B02 on Nonferrous Metals and Alloys. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide .
1.1 These test methods describe the chemical analysis of nickel, cobalt and high-temperature alloys having chemical compositions within the following limits:
1.2 The test methods in this standard are contained in the sections indicated as follows:
1.3 Other test methods applicable to the analysis of nickel alloys that may be used in lieu of or in addition to this method are Test Methods , , , , , , , .
1.4 Some of the composition ranges given in are too broad to be covered by a single method, and therefore, these test methods contain multiple methods for some elements. The user must select the proper test method by matching the information given in the scope and interference sections of each test method with the composition of the alloy to be analyzed.
1.5 The values stated in SI units are to be regarded as standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section and in , , , , , , , , , , , and .
|2. Referenced Documents|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2021-04-15 (Number of items: 2 440 988)
© Copyright 2021 NORMSERVIS s.r.o.