Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of LeadTranslate name
STANDARD published on 1.3.2017
Designation standards: ASTM E1644-17
Publication date standards: 1.3.2017
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
digestion, lead, sample preparation, wipes,, ICS Number Code 13.040.99 (Other standards related to air quality), 71.040.50 (Physicochemical methods of analysis)
|Significance and Use|
5.1 This practice is intended for the digestion of lead in dust wipe samples collected during various lead hazard activities performed in and around buildings and related structures.
5.2 This practice is also intended for the digestion of lead in dust wipe samples collected during and after building renovations.
5.3 This practice is applicable to the digestion of dust wipe samples that have or have not been collected in accordance with Practice using wipes that may or may not conform to Specification .
5.4 This practice is applicable to the digestion of dust wipe samples that were placed in either hard-walled, rigid containers such as 50-mL centrifuge tubes or flexible plastic bags.
Note 2: Due to the difficulty in performing quantitative transfers of some samples from plastic bags, hard-walled rigid containers such as 50-mL plastic centrifuge tubes are recommended for sample collection.
5.5 Digestates prepared according to this practice are intended to be analyzed for lead concentration using spectrometric techniques such as Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) and Flame Atomic Absorption Spectrometry (FAAS) (see Test Method ), or using electrochemical techniques such as anodic stripping voltammetry (see Practice ).
5.6 This practice is not capable of determining lead bound within matrices, such as silica, that are not soluble in nitric acid.
5.7 This practice is capable of determining lead bound within paint.
1.1 This practice covers the acid digestion of surface dust samples (collected using wipe sampling practices) and associated quality control (QC) samples for the determination of lead.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.2.1 Exception—Informational inch-pound units are provided in .
1.3 This practice contains notes which are explanatory and not part of mandatory requirements of the standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|2. Referenced Documents|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2021-04-13 (Number of items: 2 440 723)
© Copyright 2021 NORMSERVIS s.r.o.