ASTM E1806-96

Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

STANDARD published on 1.1.2001

Language
Format	Online Secure PDF - 125.00 USD Print design - 125.00 USD
Availability	IN STOCK
Price	125.00 USD excl. VAT
125.00 USD

The information about the standard:

Designation standards: ASTM E1806-96
Note: WITHDRAWN
Publication date standards: 1.1.2001
SKU: NS-43120
The number of pages: 21
Approximate weight : 63 g (0.14 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM E1806-96 :

Keywords:

castings, iron sample, sample lot, steel sample

Additional information

1. Scope

1.1 This practice covers the sampling of all grades of steel, both cast and wrought, and all types (grades) of cast irons and blast furnace iron for chemical and spectrochemical determination of composition. This practice is similar to ISO 14284.

1.2 This practice is divided into the following sections.

	Sections
Requirements for Sampling and Sample Preparation	6
General	6.1
Sample	6.2
Selection of a Sample	6.3
Preparation of a Sample	6.4

Liquid Iron for Steelmaking and Pig Iron Production	7
General	7.1
Spoon Sampling	7.2
Probe Sampling	7.3
Preparation of a Sample for Analysis	7.4

Liquid Iron for Cast Iron Production	8
General	8.1
Spoon Sampling	8.2
Probe Sampling	8.3
Preparation of a Sample for Analysis	8.4
Sampling and Sample Preparation for the Determination of
Oxygen and Hydrogen	8.5

Liquid Steel for Steel Production	9
General	9.1
Probe Sampling	9.2
Spoon Sampling	9.3
Preparation of a Sample for Analysis	8.4
Sampling and Sample Preparation for the Determination
of Oxygen	9.5
Sampling and Sample Preparation for the Determination
of Hydrogen	9.6

Pig Irons	10
General	10.1
Increment Sampling	10.2
Preparation of a Sample for Analysis	10.3

Cast Iron Products	11
General	11.1
Sampling and Sample Preparation	11.2

Steel Products	12
General	12.1
Selection of a Laboratory Sample or a Sample for
Analysis from a Cast Product	12.2
Selection of a Laboratory Sample or a Sample for
Analysis from a Wrought Product	12.3
Preparation of a Sample for Analysis	12.4
Sampling of Leaded Steel	12.5
Sampling and Sample Preparation for the Determination
of Oxygen	12.6

Sampling and Sample Preparation for the Determination
of Hydrogen	12.7

Keywords	13

	Annexes
Sampling Probes for Use with Liquid Iron and Steel	Annex A1
Sampling Probes for Use with Liquid Steel for the	Annex A2
Determination of Hydrogen

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 For specific precautions, see 6.4.3.5, 9.4.4.3, and 12.5.1.1 as well as Section 5.

2. Referenced Documents


E415-21	Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A48/A48M-22	Standard Specification for Gray Iron Castings
E1010-16	Standard Practice for Preparation of Disk Specimens of Steel and Iron by Remelting for Spectrochemical Analysis (Withdrawn 2022)
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
	Pig irons-Definition and classification Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.