ASTM E2375-08(2013)

Standard Practice for Ultrasonic Testing of Wrought Products

STANDARD published on 1.6.2013

Language
Format	PDF - Immediate download - 119.00 USD Print design - 119.00 USD
Availability	IN STOCK
Price	119.00 USD excl. VAT
119.00 USD

The information about the standard:

Designation standards: ASTM E2375-08(2013)
Note: WITHDRAWN
Publication date standards: 1.6.2013
SKU: NS-45173
The number of pages: 24
Approximate weight : 72 g (0.16 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Other standards related to analytical chemistry

Annotation of standard text ASTM E2375-08(2013) :

Keywords:

angle beam, contact method, immersion ultrasonic, longitudinal wave, nondestructive, straight beam, ultrasonic, ultrasonic examination, ultrasonic technique, ultrasound, wrought metal products, wrought metals, ICS Number Code 77.040.20 (Non-destructive testing of metals)

Additional information

Significance and Use

4.1 This practice is intended primarily for the examination of wrought metals, forged, rolled, machined parts or components to an ultrasonic class most typically specified in the purchase order or other contract document.

1. Scope

1.1 Purpose—This practice establishes the minimum requirements for ultrasonic examination of wrought products.

1.2 Application—This practice is applicable for examination of materials such as, wrought metals and wrought metal products.

1.2.1 Wrought Aluminum Alloy Products—Examination shall be in accordance with Practice B594.

1.3 Acceptance Class—When examination is performed in accordance with this practice, engineering drawings, specifications, or other applicable documents shall indicate the acceptance criteria. Five ultrasonic acceptance classes are defined in 1.4 Order of Precedence—Contractual requirements and authorized direction from the cognizant engineering organization may add to or modify the requirements of this practice. Otherwise, in the event of conflict between the text of this practice and the references cited herein, the text of this practice takes precedence. Nothing in this practice, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

1.5 Measurement Values—The values stated in inch-pounds are to be regarded as standard. The metric equivalents are in parentheses.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E164-19	Standard Practice for Contact Ultrasonic Testing of Weldments
NAS 410	Certification and Qualification of Nondestructive Test Personnel Aerospace Industries Association of America, Inc., 1250 Eye Street NW, Washington, DC 20005.
AMS 6484	Steel, Bars, Forgings, and Tubing, 080 Cr, 1.8 Ni, 0.25 Mo (0.38 - 0.43 C) (SAE 4340) Normalized and Tempered
E127-20	Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks
B594-19e1	Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products (Includes all amendments and changes 4/14/2021).
B241/B241M-22	Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
E213-22	Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
B107/B107M-13(2021)	Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
B221-21	Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
E317-21	Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
AMS 6415	Steel, Bars, Forgings, and Tubing, 0.80 Cr, 1.8 Ni, 0.25 Mo (0.38 - 0.43 C) (SAE 4340)
AMS 6409	Steel, Bars, Forgings, and Tubing, 0.80 Cr, 1.8 Ni, 0.25 Mo, (0.38 - 0.45 C), (SAE 4340) Special Aircraft Steel Cleanliness, Normalized and Tempered
AMS 4928	Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al-4V Annealed Available from Society of Automotive Engineers (SAE), 400 Commonwealth Dr., Warrendale, PA 15096-0001.
ANSI/ASNT-CP-189	ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel
SNT-TC-1A	Recommended Practice for Personnel Qualification and Certification in Nondestructive Testing Available from The American Society for Nondestructive Testing (ASNT), P.O. Box 28518, 1711 Arlingate Ln., Columbus, OH 43228-0518.
E1316-24	Standard Terminology for Nondestructive Examinations
E1158-14	Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material (Withdrawn 2019)
E1065-08	Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
E543-21	Standard Specification for Agencies Performing Nondestructive Testing
E428-08	Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

Similar standards:

BS ISO 14595:2003..

WITHDRAWN
12.8.2004

BS ISO 17470:2014..

31.1.2014

BS ISO 22029:2012..

WITHDRAWN
31.3.2013

BS ISO 22309:2011..

31.10.2011

BS ISO 22489:2006..

WITHDRAWN
28.2.2007

BS ISO 23833:2013..

30.4.2013

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.