ASTM E2584-14

Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter

STANDARD published on 15.2.2014

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM E2584-14
Note: WITHDRAWN
Publication date standards: 15.2.2014
SKU: NS-45654
The number of pages: 12
Approximate weight : 36 g (0.08 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Heat. Calorimetry

Annotation of standard text ASTM E2584-14 :

Keywords:
fire resistive material, slug calorimeter, thermal conductivity, ICS Number Code 17.200.10 (Heat. Calorimetry)

Additional information

Significance and Use

5.1 This practice is useful for testing materials in general, including composites and layered types.

5.2 The practice is especially useful for materials which undergo significant reactions or local dimensional changes, or both, during exposure to elevated temperatures and thus are difficult to evaluate using existing standard test methods such as Test Method C1113.

5.3 Performing the test over multiple heating/cooling cycles allows an assessment of the influence of reactions, phase changes, and mass transfer of reactions gases (for example, steam) on the thermal performance.

1.1 This practice describes a technique for the determination of the apparent thermal conductivity, λ_a, of materials. It is for solid materials with apparent thermal conductivities in the approximate range 0.02 < λ_a < 2 W/(m·K) over the approximate temperature range between 300 K and 1100 K.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
C1113-99	Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
E220-19	Standard Test Method for Calibration of Thermocouples By Comparison Techniques
D2214-02	Standard Test Method for Estimating the Thermal Conductivity of Leather with the Cenco-Fitch Apparatus (Withdrawn 2008)
E457-08(2020)	Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
E230-03	Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
E177-20	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods