ASTM E2693-09

Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment

STANDARD published on 1.7.2009

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM E2693-09
Note: WITHDRAWN
Publication date standards: 1.7.2009
SKU: NS-45879
The number of pages: 10
Approximate weight : 30 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM E2693-09 :

Keywords:

aerosol sampling, antimicrobial pesticides, bacteria, biocide, bulk sampling, dermal exposure, dermatitis management, metal removal fluid aerosols, metal removal fluids, microbiology, occupational health hazards, workplace atmospheres, ICS Number Code 13.100 (Occupational safety. Industrial hygiene), 75.100 (Lubricants, industrial oils and related products)

Additional information

Significance and Use

Use of this practice is intended to reduce occupational dermatitis caused by exposure to the wet metal removal environment.

Complaints of dermatitis conditions are often associated with exposures to metal removal fluid.

Implementation of this practice and incorporation of metal removal fluid management program has the potential to reduce complaints of occupational dermatitis. Elements of an effective program include: understanding dermatitis and associated causes; prevention of dermatitis and exposure to metal removal fluids; appropriate product selection; good management of additives, microorganisms, and fluids; appropriate additive (including antimicrobial pesticides) selection and additive control; appropriate tool design and assessment and control of metal removal fluid exposures including aerosols.

1. Scope

1.1 This practice sets forth guidelines for reducing dermatitis caused by exposure to the wet metal removal environment. The scope of this practice does not include exposure to chemicals that enter the body through intact skin (cutaneous route), which has the potential to cause other toxic effects.

1.2 This practice incorporates means and mechanisms to reduce dermal exposure to the wet metal removal environment and to control factors in the wet metal removal environment that have the potential to cause dermatitis.

1.3 This practice focuses on employee exposure to the skin via contact and exposure to metal removal fluid (MRF).

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

2. Referenced Documents

E2148-21	Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
E2169-22	Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
29 CFR 1910.132	Personal Protective Equipment: General Requirements
29 CFR 1910.134	Respiratory Protection
E2889-23	Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment
29 CFR 1910.133	Eye and Face Protection
29 CFR 1910.1048	Formaldehyde
29 CFR 1910 Appendix B to Subpart I	Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection
E2144-21	Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
E2250-02	Standard Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids (Withdrawn 2008)
E2525-22	Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies
29 CFR 1910.138	Hand Protection
D1356-20a	Standard Terminology Relating to Sampling and Analysis of Atmospheres (Includes all amendments and changes 9/7/2020).
D2881-19	Standard Classification for Metalworking Fluids and Related Materials
E1302-23	Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
E1370-21	Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
E1497-23	Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids
E1542-21	Standard Terminology Relating to Occupational Health and Safety
29 CFR 1910.1200	Hazard Communication
ANSI B11 TR 2–1997	Mist Control Considerations for the Design, Installation and Use of Machine Tools Using Metalworking Fluids Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
E1972-04	Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.