We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide) (Withdrawn 2023) (Includes all amendments And changes 5/24/2023).
Translate name
STANDARD published on 1.7.2017
Designation standards: ASTM E538-17a
Note: WITHDRAWN
Publication date standards: 1.7.2017
SKU: NS-688107
The number of pages: 7
Approximate weight : 21 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
caustic potash, caustic soda, flameless atomic absorption, mercury, potassium hydroxide, sodium hydroxide,, ICS Number Code 71.040.40 (Chemical analysis)
Significance and Use | ||||
4.1 Mercury is a toxic material and is also deleterious if present in caustic soda and caustic potash used in certain manufacturing processes. It must therefore be controlled as a possible pollutant. These test methods provide a procedure for measuring mercury in liquid and solid caustic soda and caustic potash. |
||||
1. Scope | ||||
1.1 These test methods cover the routine determination of mercury in caustic soda and caustic potash liquors and anhydrous caustic soda in the solid, flake, ground, and bead form by the flameless atomic absorption method. 1.2 Two test methods are described as follows: Test Method A employs a direct analysis of the sample using an alkaline reducing agent with a lower limit of detection of 0.1 ppb (ng/g). Test Method A was developed using caustic soda and caustic potash. Test Method B requires a preliminary neutralization of the sample followed by a permanganate oxidation before it can be analyzed by an acidic reducing agent with a lower limit of detection of this test method of 0.01 ppm (μg/g). Test Method B was developed using caustic soda. 1.3 Review the current Safety Data Sheets (SDS) for detailed information concerning toxicity, first-aid procedures, and safety precautions. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Sections 7 and 18. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||
2. Referenced Documents | ||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-05-09 (Number of items: 2 898 531)
© Copyright 2024 NORMSERVIS s.r.o.