We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members (Includes all amendments And changes 4/23/2020).
Automatically translated name:
Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
STANDARD published on 1.8.2015
Designation standards: ASTM E937/E937M-93(2015)e1
Note: WITHDRAWN
Publication date standards: 1.8.2015
SKU: NS-613248
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
corrosion, sprayed fire-resistive materials,, ICS Number Code 13.220.50 (Fire-resistance of building materials and elements)
Significance and Use | ||||||
5.1 It is the intent of this test method to determine relative corrosive properties of direct applied SFRM that provides an indication of serviceability. Satisfactory performance of SFRM applied to structural members and assemblies depends upon its ability to withstand the various influences that occur during the life of the structure, as well as upon its satisfactory performance under fire conditions. 5.2 This test method evaluates the relative corrosion of steel induced by SFRM and determines whether the presence of SFRM increases, decreases, or has no effect on the corrosion characteristics of steel. |
||||||
1. Scope | ||||||
1.1 This test method covers a procedure for measuring the corrosion to steel induced by sprayed fire-resistive material. 1.2 These SFRMs include sprayed fibrous and cementitious materials applied directly in contact with the structural members. 1.3 This test method is applicable only to laboratory procedures. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historical
1.10.2014
Historical
1.5.2010
Historical
1.9.2008
Historical
1.11.2013
Historical
15.11.2011
Historical
15.1.2010
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-04-25 (Number of items: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.