Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM F1673-10(2021)e1
Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems (Includes all amendments and changes 11/1/2021).
Translate name
STANDARD published on 15.4.2016
The information about the standard:
Designation standards: ASTM F1673-10(2021)e1
Publication date standards: 15.4.2016
SKU: NS-1041777
The number of pages: 7
Approximate weight : 21 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Installations and equipment for waste disposal and treatmentPlastics in general
Annotation of standard text ASTM F1673-10(2021)e1 :
This specification covers requirements for polyvinylidene drainage systems for corrosive applications. Requirements for material, pipe and fittings are included. Polyvinylidene fluoride includes emulsion/suspension polymerization and copolymers of vinylidene fluoride/hexafluoropropylene produced by either method. These requirements apply to Schedule 40 and 80 IPS and SDR 21 pipe sizes. Pipe and fittings are to be joined by heat fusion or mechanical methods. The following tests shall be performed: chemical resistance; water absorption; joint tests – hydrostatic pressure tests; mechanical joint pullout test; threads; flattening; and impact resistance for PVDF pipe and fittings.
Keywords:
acid waste, corrosion resistance, corrosive waste drainage, drain pipes, installation, joints, laboratory piped services, pipe fittings, pipes, plastic pipes, PVDF (polyvinylidene), traps (drainage), waste disposal (building) ,, ICS Number Code 13.030.40 (Installations and equipment for waste disposal and treatment),83.080.01 (Plastics in general)
Additional information
| 1. Scope | ||||||||||||||||||||||||||||||||
|
1.1 This specification covers requirements for nonpressurepolyvinylidene fluoride drainage systems for corrosive applications. Requirements for material, pipe and fittings are included. Polyvinylidene fluoride includes emulsion/suspension polymerization and copolymers of vinylidene fluoride/hexafluoropropylene produced by either method. 1.2 These requirements apply to Schedule 40 and 80 IPS, SDR 32.5, and SDR 21 pipe sizes. Pipe and fittings are to be joined by heat fusion or mechanical methods using the equipment supplied by the manufacturers. 1.3 This specification is not intended to provide for interchangeability between plastic pipe and fittings from different manufacturers, but it does allow for transition fittings for joining one manufacturer's product to another's product, provided the joining technique used is other than heat fusion. 1.4 This specification is not for polyvinylidene pressure systems. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 Notes and appendixes are not a mandatory part of this specification. 1.7 The following safety hazard caveat pertains only
to the test method portion, Section 8, of this specification:
Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024) Standard Practice for Determination of
the Impact Resistance of Thermoplastic Pipe and Fittings by Means
of a Tup (Falling Weight) Standard Specification for Unmodified
Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating
Materials Standard Specification for Drain, Waste,
and Vent (DWV) Plastic Fittings Patterns Standard Classification System for
Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated
Monomers Standard Terminology Relating to Plastic
Piping Systems (Includes all amendments and changes 10/8/2025). Standard Practices for Evaluating the
Resistance of Plastics to Chemical Reagents Standard Practice for Conditioning
Plastics for Testing Standard Specification for Taper Pipe
Threads 60° for Thermoplastic Pipe and Fittings Standard Test Method for Water Absorption
of Plastics Standard Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings Standard Practice for Underground
Installation of Thermoplastic Pipe for Sewers and Other
Gravity-Flow Applications Standard Test Method for Determination of
External Loading Characteristics of Plastic Pipe by Parallel-Plate
Loading Standard Terminology Relating to Plastics
(Includes all amendments and changes 6/15/2026). Uniform Plumbing Code Available from
International Association of Plumbing and Mechanical Officials,
5001 E. Philadelphia St., Ontario, CA 91761,
http://www.iapmo.org. MIL-STD129 Marking for Shipment and Storage |
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
