We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Guide for Measuring Diameter of Silicon and Other Semiconductor Wafers (Withdrawn 2003)
STANDARD published on 10.12.2000
Designation standards: ASTM F2074-00
Note: WITHDRAWN
Publication date standards: 10.12.2000
SKU: NS-52685
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
silicon, diameter, semiconducting materials, silicon wafers, ICS Number Code 29.045 (Semiconducting materials)
1. Scope |
This standard was transferred to SEMI (www.semi.org) May 2003 1.1 This guide defines standardized positions for measuring diameter of circular wafers of silicon and other semiconducting materials that contain flats or notches on the periphery. It was developed for use with silicon wafers with standard diameter and flat positions as given in SEMI Specifications M1. 1.2 It may be applied to other semiconductor wafers if the flat locations are properly taken into account. 1.3 Wafers of any size can be measured provided that suitable test jigs and instruments are available. 1.4 Roundness of wafers cannot be determined from measurements made solely at the positions defined in this guide. No information is provided concerning the diameter of the wafer at points other than those measured. |
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-05-02 (Number of items: 2 896 910)
© Copyright 2024 NORMSERVIS s.r.o.