ASTM F2332-06(2013)

Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components

STANDARD published on 1.5.2013

Language
Format	Online Secure PDF - 175.00 USD Print design - 175.00 USD
Availability	IN STOCK
Price	175.00 USD excl. VAT
175.00 USD

The information about the standard:

Designation standards: ASTM F2332-06(2013)
Note: WITHDRAWN
Publication date standards: 1.5.2013
SKU: NS-53586
The number of pages: 145
Approximate weight : 466 g (1.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Plain bearings

Annotation of standard text ASTM F2332-06(2013) :

Keywords:

ABEC 5P, ABEC 7P, angular contact, barrier coating, bearing void, calibration (classification), contact angle, counterbored outer ring, deep groove radial, extended inner ring, instrument bearing, nonseparable, passivation, precision bearing, separable, starting torque, stepped inner ring, ICS Number Code 21.100.10 (Plain bearings)

Additional information

1. Scope

1.1 This specification covers annular ball bearings intended primarily for use in instrument and precision rotating components. Instrument and precision ball bearings should meet tolerances specified in ABMA Standard 12.2, Instrument Ball Bearings Inch Design for Classes ABEC 5P and 7P.

1.2 Intended Use—Ball bearings defined by this specification are intended for use in critical components of instrument systems. Such components range from air circulating blowers and drive motors through precision gear trains, gyro gimbals, and pickoffs to rate integrating spin-motors.

1.3 The specification contains many of the requirements of MIL-B-81793, which was originally developed by the Department of Defense and maintained by the Naval Air Systems Command (Navy-AS) in Lakehurst, NJ. The following government activity codes may be found in the Department of Defense, Standardization Directory SD-1.²

Preparing activity

Custodians

Review activities

Navy - AS

Army - AT

Army-AV

Navy - AS

Navy - MC, SH

Air Force - 99

Air Force–84

DLA - GS

1.4 Classification—Annular ball bearings for instrument and precision rotating components shall be of the following types, as specified:

1.4.1 Type I—Annular ball bearing, for instruments and precision rotating components, deep groove, unflanged; (See 1.4.2 Type II—Annular ball bearing, for instruments and precision rotating components, deep groove, flanged; (See 1.4.3 Type III—Annular ball bearing, for instruments and precision rotating components, deep groove, unflanged, inner ring extended; (See Annex A9 – Annex A12)

1.4.4 Type IV—Annular ball bearing, for instruments and precision rotating components, deep groove, flanged, inner ring extended; (See Annex A13 – Annex A16)

1.4.5 Type V—Annular ball bearing, for instruments and precision rotating components, angular contact, unflanged, nonseparable, and counterbored outer ring; (See 1.4.6 Type VI—Annular ball bearing, for instruments and precision rotating components, angular contact, flanged, nonseparable, and counterbored outer ring on flange side; (See 1.4.7 Type VII—Annular ball bearing, for instruments and precision rotating components, angular contact, unflanged, separable, and stepped inner ring; (See 1.4.8 Type VIII—Annular ball bearing, for instruments and precision rotating components, angular contact, flanged, separable, and stepped inner ring; (See 1.4.9 Type IX—Annular ball bearing, for instruments and precision rotating components, angular contact, unflanged, nonseparable, and stepped inner ring. (See 1.5 Inch-Pound Specification—This specification covers only the inch-pound bearings.

1.5.1 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents

ISO 10012-1	Quality Assurance Requirements for Measuring Equipment
E45-18a(2023)	Standard Test Methods for Determining the Inclusion Content of Steel (Includes all amendments and changes 11/6/2023).
D2273-08	Standard Test Method for Trace Sediment in Lubricating Oils
A967-05	Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A240/A240M-23a	Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications (Includes all amendments and changes 11/7/2023).
A313/A313M-18	Standard Specification for Stainless Steel Spring Wire
SAE-AMS 6444	Steel Bars, Forgings, and Mechanical Tubing, 1.45 Cr (0.98-1.10C) (SAE 52100) Premium Aircraft Quality Consumable Electrode Vacuum Melted
A580/A580M-23	Standard Specification for Stainless Steel Wire
A666-23	Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
Z540.1	Laboratories, Calibration, Measuring and Test Equipment
ISO 1224	Bearings, Rolling--Instrument Precision Bearings
ISO 3290	Bearings, Rolling-Balls-Dimensions and Tolerances
B89.3.1	Measurement of Out of Roundness
STD 1	Terminology for Anti-Friction Ball and Roller Bearings and Parts
Z1.4	Sampling Procedures and Tables for Inspection by Attributes
B46.1	Surface Texture (Surface Roughness, Waviness and Lay)
ISO 14644-2	Cleanrooms and Associated Controlled Environments. Part 2: Specifications for Testing and Monitoring to Provide Continued Compliance with ISO 14644-1
ISO 14644-1	Cleanrooms and Associated Controlled Environments. Part 1: Classification of Air Cleaniness
E140-12B(2019)e1	Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness (Includes all amendments and changes 5/7/2019).
A756-17(2022)	Standard Specification for Stainless Anti-Friction Bearing Steel
SAE-AMS-QQ-S-763	Steel Bars, Wire, Shapes, and Forgings, Corrosion Resistant
A380-06	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
STD 10	Metal Balls
STD 12.2	Instruments Ball Bearings--Inch Design
SAE-AMS 2303	Aircraft Quality Steel Cleanliness, Martensitic Corrosion Resistant Steels, Magnetic Particle Inspection Procedure
SAE-AMS 5688	Steel, Corrosion Resistant Wire, 18CR-9.0NI, (SAE 30302), Spring Temper
SAE-AMS 5880	Steel, Corrosion Resistant Bars, Wire and Forgings, 17CR-0.52MO (0.95-1.2C)

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.