ASTM F710-22

Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

Translate name

STANDARD published on 15.12.2022

Language
Format	PDF - Immediate download - 63.00 USD PDF + redline - Immediate - 75.60 USD Print design - 63.00 USD Print + redline - 75.60 USD
Availability	IN STOCK
Price	63.00 USD excl. VAT
63.00 USD

The information about the standard:

Designation standards: ASTM F710-22
Publication date standards: 15.12.2022
SKU: NS-1099439
The number of pages: 10
Approximate weight : 30 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Ceilings. Floors. Stairs Non-textile floor coverings

Annotation of standard text ASTM F710-22 :

This practice covers the procedure for determining the acceptability of concrete floors for the installation of resilient flooring. It also includes suggestions for ensuring that the constructed concrete floor is acceptable for such installations but does not cover tests for adequacy of the concrete floor to perform structural requirements. A permanent, effective moisture vapor retarder, of the specified thickness and permeance, is required under all on- or below-grade concrete floors. Concrete floors for resilient floorings should be permanently dry, clean, smooth, structurally sound, and free of substances that may prevent adhesive bonding. Surface cracks, grooves, depression, control joints or other non-moving joints, and other irregularities should be filled or smoothed with latex patching or a recommended underlayment compound. The surface of the floor should be cleaned by scraping, brushing, vacuuming, or any other method. All concrete slabs should be tested for moisture regardless of age or grade level while all concrete floors should be tested for pH before installing resilient flooring.

Keywords:
adhesive removers, cement, concrete floors, installation, moisture, moisture vapor emissions, pH testing, preparation, resilient flooring, rubber, slabs,, ICS Number Code 91.060.30 (Ceilings. Floors. Stairs),97.150 (Non-textile floor coverings)

Additional information

1. Scope

1.1?This practice covers the determination of the acceptability of a concrete floor for the installation of resilient flooring.

1.2?This practice includes suggestions for the construction of a concrete floor to ensure its acceptability for installation of resilient flooring.

1.3?This practice does not cover the adequacy of the concrete floor to perform its structural requirements.

1.4?This practice covers the necessary preparation of concrete floors prior to the installation of resilient flooring.

1.5?This practice does not supersede in any manner the resilient flooring or adhesive manufacturer's written instructions. Consult the individual manufacturer for specific recommendations.

1.6?Although carpet tiles, carpet, wood flooring, coatings, films, and paints are not specifically intended to be included in the category of resilient floor coverings, the procedures included in this practice may be useful for preparing concrete floors to receive such finishes.

1.7?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.9?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

D4263-83(2018)	Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4397-16(2023)	Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
D4259-18	Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application
C109/C109M-23	Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube Specimens)
C472-20	Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
F2170-19a	Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes (Includes all amendments and changes 1/9/2020).
E1486-14(2022)	Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1745-17(2023)	Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
F141-23	Standard Terminology Relating to Resilient Floor Coverings
F710-22	Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
F1869-23	Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
E1155-20	Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.