We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Measuring Particle Size of Wide-Size Range Dry Toners (Withdrawn 2003)
STANDARD published on 10.5.1997
Designation standards: ASTM F751-83(1997)
Note: WITHDRAWN
Publication date standards: 10.5.1997
SKU: NS-56345
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
Electronic sensing zone apparatus, Electrostatic copier, Flow and flow rate, Particle analysis-toners, particle size (from 1.0-80 [mu]m diameter) of dry toners, using, dual-aperture electronic sensing zone apparatus, test, ICS Number Code 19.120 (Particle size analysis. Sieving)
1. Scope |
1.1 This test method covers a dual-aperture particle size analysis using an electronic sensing zone apparatus. Dry inks, toners, etc., are covered. Particles as small as 1.0-[mu]m diameter and as large as 80-[mu]m diameter in a single powder system can be analyzed. 1.2 This test method is for particulate systems having a size range greater than 20 to 1, therefore requiring two apertures. For applications where particle size difference is between 1.4 [mu]m and 80 [mu]m and having a 20 to 1 or less size range, the simpler procedure found in Test Method F577 should be used. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-04-29 (Number of items: 2 896 215)
© Copyright 2024 NORMSERVIS s.r.o.