We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
Translate name
STANDARD published on 1.8.2016
Designation standards: ASTM F891-16
Note: WITHDRAWN
Publication date standards: 1.8.2016
SKU: NS-666131
The number of pages: 9
Approximate weight : 27 g (0.06 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
cellular core, coextruded, drain, waste, and vent, PVC, Schedule 40, thermoplastic ,, ICS Number Code 23.040.20 (Plastic pipes)
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.1 This specification covers coextruded poly(vinyl chloride) (PVC) plastic pipe with a cellular core and concentric inner and outer solid layers, and is produced using a multilayer coextrusion die for nonpressure use in three series: an IPS Schedule 40 series; a PS series with an iron pipe size outside diameter with varying wall thickness as required for pipe stiffness of 25, 50, and 100; and a sewer and drain series. 1.2 The function of this specification is to provide standardization of product-technical data and serve as a purchasing guide. 1.3 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. The notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. Note 1: All the pipe series covered by this specification are
permitted to be perforated or belled for joining by solvent cement
or belled for joining by an elastomeric seal (gasket). Because this
pipe is OD controlled, the inside diameter will vary, and
therefore, the pipe ID is not suitable for use as a socket. (For
more information see Specification D2672.)
Note 2: This standard specifies dimensional, performance and
test requirements for plumbing and fluid handling applications, but
does not address venting of combustion gases.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 3: Specifications related to this specification are as
follows: D2665, D2729, D3034, F512, F758, and F789.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-05-09 (Number of items: 2 898 531)
© Copyright 2024 NORMSERVIS s.r.o.