ČSN EN 12285-4 (698235)

Workshop fabricated steel tanks - Part 4: Vertical cylindrical single skin and double skin tanks for the aboveground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings

Translate name

STANDARD published on 1.5.2026


Language
Format
AvailabilityIN STOCK
Price20.80 USD excl. VAT
20.80 USD

The information about the standard:

Designation standards: ČSN EN 12285-4
Classification mark: 698235
Catalog number: 523307
Publication date standards: 1.5.2026
SKU: NS-1268387
The number of pages: 40
Approximate weight : 120 g (0.26 lbs)
Country: Czech technical standard
Category: Technical standards ČSN

Annotation of standard text ČSN EN 12285-4 (698235):

This document specifies the requirements for metallic shop fabricated shop fabricated cylindrical vertical steel tanks, single and double skin for the aboveground storage of water polluting liquids (both flammable and non-flammable) within the following limits:

  • - from 1250 mm up to 4 000 mm inner tank nominal diameter and,
  • - up to maximum overall length of 6 times the nominal inner tank diameter and
  • - tank possible to be divided from 1 to 5 compartments
  • - for liquids with maximum density of up to 1,9 kg/l and,
  • - with an operating pressure (P0) of maximum 50kPa (0,5 bar (g)) and minimum - 5 kPa (- 50 mbar (g)) and,
  • - where double skin tanks with vacuum leak detection system are used, the cinematic viscosity of the stored media does not exceed 5 x 10-3 m2/s

This document is applicable for normal ambient temperature conditions (-40 °C to + 50 °C). Where temperatures are outside this range, additional requirements are taken into account.

This document is not applicable to tanks used for storage and/or supply of fuel/gas for building heating/cooling systems, and of hot or cold water not intended for human consumption, nor to loads and special measures necessary in areas subject to risk of earthquakes.

This document is not applicable for the storage of liquids having dangerous goods classes listed in Table 1 because of the special dangers involved.

Table 1 - List of dangerous goods which are not covered by this standard

UN-classification

Type of dangerous goods

Class 1

Explosives

Class 4.2

Substances liable to spontaneous combustion

Class 4.3

Substances which in contact with water emit flammable gases

Class 5.2

Organic peroxides

Class 6.2

Infectious substances

Class 7

Radioactive substances, hydrocyanic or hydrocyanic solvent liquids, metal carbons, hydrofluoric acid, bromide liquids

OTE - The classifications referred to are those adopted by the United Nations Committee of Experts on the Transport of Dangerous Goods (not to be interpreted as tank classes described in 6.2)

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.




Cookies Cookies

We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.

You can refuse consent here.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.