Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ČSN EN 17163 (500361)
Pulp, paper and board - Determination of primary aromatic amines (PAA) in a water extract by a LC-MS method
Translate name
STANDARD published on 1.7.2019
The information about the standard:
Designation standards: ČSN EN 17163
Classification mark: 500361
Catalog number: 507400
Publication date standards: 1.7.2019
SKU: NS-952954
The number of pages: 20
Approximate weight : 60 g (0.13 lbs)
Country: Czech technical standard
Category: Technical standards ČSN
The category - similar standards:
Annotation of standard text ČSN EN 17163 (500361):
This document describes two representative methods for the determination of the extractable amount of specific primary aromatic amines (PAA) in a water extract of paper, board and pulp samples by means of HPLC with MS/MS detection which basically differ concerning the choice of the mobile and stationary phases. Deviating from this standard further methods may be applicable if it can be shown that comparable results can be achieved. A validation should be carried out by each laboratory. It is applicable for the determination of the 22 primary aromatic amines (PAA) mentioned in the annex of Directive 2002/61/EC of 19th July 2002 amending Council Directive 76/769/EEC relating to restrictions on the market and use of certain dangerous substances and preparations (azocolourants) which are classified as carcinogenic categories 1A and 1B according to the CLP regulation and aniline. The method described by this standard should be also applicable for the determination of further primary aromatic amines (PAA). A validation for every further analyte has to be done by the laboratory using this method. The extractable amount of a primary aromatic amine (PAA) is expressed in mg PAA per litre water extract. This method is suitable for the determination of PAA with a working range of about 0,001 mg/l - 0,020 mg/l water extract. Deviating from this standard further methods may be applicable if it can be shown that comparable results can be achieved. A validation should be carried out by each laboratory
Preview of the standard ČSN EN 17163 (500361)
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
