ČSN EN ISO 11691 (011666)

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method

Translate name

STANDARD published on 1.6.2021


Language
Format
AvailabilityIN STOCK
Price14.30 USD excl. VAT
14.30 USD

The information about the standard:

Designation standards: ČSN EN ISO 11691
Classification mark: 011666
Catalog number: 512055
Publication date standards: 1.6.2021
SKU: NS-1026189
The number of pages: 24
Approximate weight : 72 g (0.16 lbs)
Country: Czech technical standard
Category: Technical standards ČSN

The category - similar standards:

Acoustics in building. Sound insulation

Annotation of standard text ČSN EN ISO 11691 (011666):

This document specifies a laboratory substitution method to determine the insertion loss without flow of ducted, mainly absorbent, circular and rectangular silencers, as well as other duct elements for use in ventilating and air-conditioning systems. NOTE - Laboratory measurement procedures for ducted silencers with superimposed flow are described in ISO 7235[5]. This document is applicable to silencers where the design velocity does not exceed 15 m/s. As the method does not include self-generated flow noise, this document is not suitable for tests on silencers where this type of noise is of great importance for the evaluation of the silencer performance. As most silencers, particularly in offices and dwelling, have design velocities below 15 m/s, this document can often be a cost-efficient alternative to ISO 7235[5]. The insertion loss determined according to this document in a laboratory is not necessarily the same as the insertion loss obtained in an installation in the field. Different sound and flow fields in the duct yield different results. In this document, the sound field is dominated by plane wave modes. Due to the use of regular test ducts, the results can include some flanking transmission via structural vibrations in the duct walls that sets an upper limit to the insertion loss that can be determined. This document is intended to be used for circular silencers with diameters of 80 mm to 2 000 mm or for rectangular silencers with cross-sectional areas within the same range

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.


This website uses cookie files. By browsing this website you expresses your consent with using cookies. More information / I understand