ČSN EN ISO 18674-3 (721012)

Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers

Translate name

STANDARD published on 1.2.2018


Language
Format
AvailabilityIN STOCK
Price23.40 USD excl. VAT
23.40 USD

The information about the standard:

Designation standards: ČSN EN ISO 18674-3
Classification mark: 721012
Catalog number: 504245
Publication date standards: 1.2.2018
SKU: NS-806557
The number of pages: 52
Approximate weight : 156 g (0.34 lbs)
Country: Czech technical standard
Category: Technical standards ČSN

Annotation of standard text ČSN EN ISO 18674-3 (721012):

This document specifies the measurement of displacements across a line by means of inclinometers carried out for geotechnical monitoring. General rules of performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills and of geotechnical works are presented in ISO 18674 1. This document also refers to deflectometers (see Annex B) to supplement inclinometers for the determination of horizontal displacements across horizontal measuring lines. NOTE - In general, there are two independent displacement components acting across measuring lines. Inclinometers allow the determination of the two components for vertical measuring lines. For horizontal lines, inclinometers are limited to the determination of the vertical component only. If applied in conjunction with ISO 18674 2, this document allows the determination of displacements acting in any direction. This document is applicable to: - checking geotechnical designs in connection with the Observational Design procedure; - monitoring of geotechnical structures prior to, during and after construction (e.g. natural slopes, slope cuts, embankments, excavation walls, foundations, dams, refuse dumps, tunnels); - deriving geotechnical key parameters (e.g. from results of pile load tests or trial tunnelling); - identification and monitoring of active shear planes in the ground. NOTE - This document fulfils the requirements for the performance monitoring of the ground, of structures interacting with the ground and of geotechnical works by the means of inclinometers as part of the geotechnical investigation and testing in accordance with References [1] and [2]

These changes apply to this standard:

ČSN EN ISO 18674-3:2018/A1 (721012) Change

Geotechnický průzkum a zkoušení - Geotechnický monitoring - Část 3: Měření posunů kolmo k přímce: inklinometry (Norma k přímému použití jako ČSN).

Change published on 1.8.2020

Selected format:
English -
Print design (8.00 USD)


Show all technical information.
8.00 USD


IN STOCK

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.




Cookies Cookies

We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.

You can refuse consent here.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.