Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ČSN ETSI EN 300330-V2.1.1 (875026)
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
Translate name
STANDARD published on 1.9.2017
The information about the standard:
Designation standards: ČSN ETSI EN 300330-V2.1.1
Classification mark: 875026
Catalog number: 502432
Publication date standards: 1.9.2017
SKU: NS-693260
The number of pages: 80
Approximate weight : 240 g (0.53 lbs)
Country: Czech technical standard
Category: Technical standards ČSN
The category - similar standards:
Other equipment for radiocommunicationsElectromagnetic compatibility in general
Annotation of standard text ČSN ETSI EN 300330-V2.1.1 (875026):
V2.1.1 The present document specifies technical characteristics and methods of measurements for the following Short Range Device major equipment types: 1) Generic Short range Devices including transmitters and receivers operating in the range from 9 kHz to 25 MHz; and 2) inductive loop transmitters and receivers operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID), Near Field Communication (NFC) and Electronic Article Surveillance (EAS) operating in LF and HF ranges. Also the present document covers fixed, mobile and portable stations. NOTE: If a system includes transponders, these are measured together with the transmitter. The frequency ranges and limits of the present document are based on the European Commission Decision for SRDs [i.10], CEPT/ERC/REC 70-03 [i.1]. When selecting parameters for new SRDs, which may have inherent safety of human life implications, manufacturers and users should pay particular attention to the potential for interference from other systems operating in the same or adjacent bands. The radio equipment, covered by the present document is divided into several classes which are dependent on the antenna used (see annex B). Three types of measuring methods are defined in the present document due to the varied nature of the antenna types for equipment used in this band. One method measures the RF carrier current, another measures the radiated H-field and the third conducted power. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.4] under the conditions identified in annex A
Preview of the standard ČSN ETSI EN 300330-V2.1.1 (875026)
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
