Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60095-6-ed.1.0
Lead-acid starter batteries - Part 6: Batteries for micro-cycle applications
Translate name
STANDARD published on 12.9.2019
The information about the standard:
Designation standards: IEC 60095-6-ed.1.0
Publication date standards: 12.9.2019
SKU: NS-970095
The number of pages: 64
Approximate weight : 192 g (0.42 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60095-6-ed.1.0 :
IEC 60095-6:2019 is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as power source for the starting of internal combustion engines (ICE), lighting and also for auxiliary equipment of ICE vehicles. These batteries are commonly called "starter batteries". The batteries within the scope of this document are used for micro-cycle applications in vehicles which can also be called start-stop (or stop-start, idling-stop system, micro-hybrid or idle-stop-and-go) applications. In cars with this special capability, the internal combustion engine is switched off during a complete vehicle stop, during idling with low speed or during idling where there is no need to support the vehicle movement by the internal combustion engine. During the phases in which the engine is switched off, most of the electric and electronic components of the car are supplied by the battery without support of the alternator. In addition, in most cases an additional regenerative braking (recuperation or regeneration of braking energy) function is installed. The batteries under these applications are stressed in a completely different way compared to classical starter batteries. Aside from these additional properties, these batteries need to crank the ICE and support the lighting and also auxiliary functions in a standard operating mode with the support of the alternator when the internal combustion engine is switched on. All batteries within this scope fulfil basic functions, which are tested under the application of IEC 60095-1. This document specifies the general requirements and methods of test specific to lead-acid batteries used for micro-cycle applications. This document is applicable to batteries for the following purposes: • lead-acid batteries of the dimensions according to IEC 600952 for vehicles with the capability to automatically switch off the ICE during vehicle operation either in standstill or when moving ("start-stop"); • lead-acid batteries of the dimensions according to IEC 600952 for vehicles with startstop applications with the capability to recover braking energy or energy from other sources. Li-ion technology is excluded from this document. LIEC 60095-6:2019 est applicable aux batteries daccumulateurs au plomb dune tension nominale de 12 V utilisees principalement comme sources dalimentation pour le demarrage des moteurs a combustion interne, ainsi que pour leclairage et les installations auxiliaires des vehicules equipes de moteur a combustion interne. Dans le langage courant, ce type de batteries est appele "batterie de demarrage". Les batteries relevant du domaine dapplication du present document sont utilisees sur des vehicules "microhybrides" integrant un systeme de type start-stop et/ou un systeme de recuperation denergie dans lesquels la batterie est soumise a des sollicitations de type "microcyclage". Sur les automobiles possedant cette capacite speciale, le moteur a combustion interne est coupe a larret complet du vehicule, au ralenti a faible vitesse ou au ralenti lorsquil nest pas necessaire que le moteur a combustion interne assure le deplacement du vehicule. Lors des phases au cours desquelles le moteur est coupe, la plupart des composants electriques et electroniques de lautomobile sont alimentes par la batterie sans le soutien de lalternateur. De plus, dans la plupart des cas, une fonction supplementaire de freinage par recuperation (recuperation ou regeneration de lenergie de freinage) est installee. Dans ces applications, les batteries sont soumises a des contraintes tout a fait differentes de celles qui sexercent sur les batteries de demarrage de type classique. Outre ces proprietes supplementaires, il y a lieu que ces batteries assurent le demarrage du moteur a combustion interne et leclairage, ainsi que des fonctions auxiliaires selon un mode de fonctionnement classique avec le soutien de lalternateur quand le moteur a combustion interne est en marche. Toutes les batteries relevant de ce domaine dapplication assurent des fonctions de base qui sont soumises a lessai en application de lIEC 60095-1. Le present document specifie les exigences generales et les methodes dessai specifiques aux batteries au plomb utilisees pour les applications microcycles. Les applications de ces batteries sont les suivantes: • batteries au plomb de dimensions conformes a lIEC 600952 pour les vehicules capables de couper automatiquement le moteur a combustion interne pendant le fonctionnement du vehicule, quil soit immobile ou en mouvement ("start-stop"); • batteries au plomb de dimensions conformes a lIEC 600952 pour les vehicules destines aux applications start-stop et capables de recuperer lenergie de freinage ou lenergie provenant dautres sources. La technologie lithium-ion ne releve pas du domaine dapplication du present document.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
