Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60317-17-ed.4.0
Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105
Translate name
STANDARD published on 5.6.2020
The information about the standard:
Designation standards: IEC 60317-17-ed.4.0
Publication date standards: 5.6.2020
SKU: NS-995143
Approximate weight : 300 g (0.66 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60317-17-ed.4.0 :
IEC 60317-17:2020 specifies the requirements of enamelled rectangular copper winding wires of class 105 with a sole coating based on polyvinyl acetal resin, which can be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements NOTE 1 A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. NOTE 2 Polyvinyl acetate is a general name for a family of thermoplastic vinyl resins produced by the condensation of polyvinyl alcohol with an aldehyde. Examples are polyvinyl acetal, polyvinyl formal and polyvinyl butyral. The range of nominal conductor dimensions covered by this document is: - width: min. 2,0 mm max. 31,5 mm; - thickness: min. 0,80 mm max. 10,00 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified ratio of width/thickness are given in IEC 60317-0-2. This fourth edition cancels and replaces the third edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - modification of the Scope (Clause 1); - renaming of stretching test to adherence test and a modification of the requirement in 8.2. LIEC 60317-17:2020 specifie les exigences relatives aux fils de bobinage de section rectangulaire en cuivre emailles de classe 105 avec un revetement simple a base de resine acetal de polyvinyle qui peut etre modifiee sous reserve quelle conserve lidentite chimique de la resine initiale et respecte lensemble des exigences specifiees du fil. NOTE 1 Une resine modifiee est une resine dont les proprietes chimiques ont ete modifiees ou qui contient un ou plusieurs additifs visant a ameliorer certaines performances ou caracteristiques dapplication. NOTE 2 Lacetate de polyvinyle est le nom generique designant une famille de resines thermoplastiques vinyliques produites par la condensation de lalcool polyvinylique avec un aldehyde. Des exemples sont lacetal de polyvinyle, le formal de polyvinyle et le butyral de polyvinyle. La gamme des dimensions nominales des conducteurs couvertes par le present document est: - largeur: min. 2,0 mm max. 31,5 mm; - epaisseur: min. 0,80 mm max. 10,00 mm. Les fils de grades 1 et 2 sont couverts par la presente specification et sappliquent a toute la gamme de conducteurs. Les combinaisons largeur-epaisseur specifiees ainsi que le rapport largeur/epaisseur specifie sont indiques dans lIEC 60317-0-2. Cette quatrieme edition annule et remplace la troisieme edition parue en 2010. Cette edition constitue une revision technique. Cette edition inclut les modifications techniques majeures suivantes par rapport a ledition precedente: - modification du domaine d’application (Article 1); - "essai d’etirement" renomme "essai d’adherence", et modification de l’exigence en 8.2.
We recommend:
Updating of laws
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
