Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60317-29-ed.1.0
Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
STANDARD published on 15.10.1990
The information about the standard:
Designation standards: IEC 60317-29-ed.1.0
Publication date standards: 15.10.1990
SKU: NS-409490
The number of pages: 13
Approximate weight : 39 g (0.09 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60317-29-ed.1.0 :
IEC 60317-29:1990 specifies the requirements of enamelled rectangular copper winding wire of class 200 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. Class 200 is a thermal class that requires a minimum temperature index of 200 and a heat shock temperature of at least 220 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor dimensions covered by this standard is: - width: min. 2,0 mm max. 16,0 mm; - thickness: min. 0,80 mm max. 5,60 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 60317-0-2. IEC 60317-29:1990 concerne les fils de bobinage de section rectangulaire en cuivre emaille de classe 200 avec un double revetement. La sous-couche est a base de resine polyester ou polyesterimide qui peut etre modifiee. Elle doit conserver lidentite chimique de la resine initiale et repondre a toutes les exigences du fil. La surcouche est a base de resine polyamide-imide. Une classe 200 est une classe thermique qui exige un indice de temperature minimal de 200 et une temperature de choc thermique dau moins 220 °C. La temperature en degres Celsius correspondant a lindice de temperature nest pas necessairement celle a laquelle il est recommande dutiliser le fil et cela dependra de beaucoup de facteurs, y compris du type dequipement considere. La gamme des dimensions nominales des conducteurs couverte par la presente norme est: - largeur: min. 2,0 mm max. 16,0 mm; - epaisseur: min. 0,80 mm max. 5,60 mm. Cette specification comprend les fils de grade 1 et de grade 2 et sapplique aux conducteurs de toute la gamme. Les combinaisons largeur-epaisseur specifiees ainsi que le rapport largeur/epaisseur specifie sont donnes dans la CEI 60317-0-2.
These changes apply to this standard:
IEC 60317-29-ed.1.0/Amd.1
Change
Show all technical information.
Amendment 1 - Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
(Amendement 1 - Specifications pour types particuliers de fils de bobinage. Partie 29: Fil de section rectangulaire en cuivre emaille avec polyester ou polyesterimide et avec surcouche polyamide-imide, classe 200)
Change published on 22.12.1997
Selected format:Show all technical information.
IEC 60317-29-ed.1.0/Amd.2
Change
Show all technical information.
Amendment 2 - Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
(Amendement 2 - Specifications pour types particuliers de fils de bobinage - Partie 29: Fil de section rectangulaire en cuivre emaille avec polyester ou polyesterimide et avec surcouche polyamide-imide, classe 200)
Change published on 26.4.2010
Selected format:Show all technical information.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
