Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60317-73-ed.1.0
Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200
Translate name
STANDARD published on 27.2.2018
The information about the standard:
Designation standards: IEC 60317-73-ed.1.0
Publication date standards: 27.2.2018
SKU: NS-809208
The number of pages: 17
Approximate weight : 51 g (0.11 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60317-73-ed.1.0 :
IEC 60317-73:2018 specifies the requirements of enamelled rectangular aluminium winding wire of class 200 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which can be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor dimensions covered by this standard is: - width: min. 2,0 mm - max. 16,0 mm; - thickness: min. 0,80 mm - max. 5,60 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 60317-0-9:2015. Keywords: insulated wires used for windings IEC 60317-73:2018 specifie les exigences relatives aux fils de bobinage de section rectangulaire en aluminium emaille de classe 200 a double revetement. La premiere couche de revetement est en resine de polyester ou de polyesterimide; elle peut etre modifiee a condition de conserver les proprietes chimiques de la resine dorigine et de respecter toutes les exigences specifiees pour les fils. La deuxieme couche de revetement est en resine de polyamide-imide. NOTE Une resine modifiee est une resine dont les proprietes chimiques ont ete modifiees ou qui contient un ou plusieurs additifs visant a ameliorer certaines performances ou caracteristiques dapplication.La plage des dimensions nominales des conducteurs couvertes par la presente norme est: - pour la largeur: min. 2,0 mm - max. 16,0 mm; - pour lepaisseur: min. 0,80 mm - max. 5,60 mm. Les fils de grades 1 et 2 sont couverts par la presente specification et sappliquent a toute la gamme des conducteurs. Les combinaisons largeur-epaisseur specifiees ainsi que le rapport largeur/epaisseur specifie sont indiques dans lIEC 60317-0-9:2015. Mots cles: fils isoles utilises pour les enroulements
These changes apply to this standard:
IEC 60317-73-ed.1.0/Amd.1
Change
Show all technical information.
Amendment 1 - Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200
(Amendement 1 - Specifications pour types particuliers de fils de bobinage - Partie 73: Fil de section rectangulaire emaille en aluminium revetu de polyester ou de polyesterimide ainsi que de polyamide-imide, de classe 200)
Change published on 14.6.2024
Selected format:Show all technical information.
We recommend:
Updating of laws
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
