Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60335-2-124-ed.1.0
Household and similar electrical appliances - Safety - Part 2-124: Particular requirements for commercial dry ice blasting machines
Translate name
STANDARD published on 29.1.2024
The information about the standard:
Designation standards: IEC 60335-2-124-ed.1.0
Publication date standards: 29.1.2024
SKU: NS-1165318
Approximate weight : 300 g (0.66 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60335-2-124-ed.1.0 :
IEC 60335-2-124:2024 deals with the safety of dry ice blasting machines intended for commercial indoor or outdoor use for the hand-guided cleaning, decoating and stripping of surfaces. The blasting machines are either equipped with containers for storage of dry ice or produce dry ice internally. These machines are not equipped with a traction drive. The following power systems are covered: - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. This standard does not apply to - dry ice blasting machines with integrated generation of compressed air; - dry ice blasting machines using other transport gases besides compressed air or nitrogen; - dry ice blasting machines with nozzles being controlled by robotic arms; - spray extraction machines for commercial use (IEC 60335-2-68); - high pressure cleaners (IEC 60335-2-79); - sand blasting equipment (abrasive blasting); - hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series); - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for use in vehicles in non-ventilated environment; - machines designed for use on board of ships or aircraft. LIEC 60335-2-124:2024 traite de la securite des machines de projection de glace carbonique destinees a un usage commercial en interieur ou en exterieur pour les applications guidees a la main suivantes: nettoyage, delaquage et decapage des surfaces. Les machines de projection sont soit equipees de reservoirs pour le stockage de la glace carbonique, soit dun dispositif interne de production de glace carbonique. Ces machines ne sont pas equipees dune commande de dispositif de deplacement. Les systemes dalimentation suivants sont couverts: - moteurs alimentes par le reseau dont la tension assignee est inferieure ou egale a 250 V pour les appareils monophases et a 480 V pour les autres appareils; - machines alimentees par batteries. La presente norme ne sapplique pas - aux machines de projection de glace carbonique equipees dun systeme integre de production dair comprime; - aux machines de projection de glace carbonique qui utilisent dautres gaz de transport que lair comprime ou lazote; - aux machines de projection de glace carbonique equipees de buses commandees par des bras robotiques; - aux machines de nettoyage par pulverisation et aspiration a usage commercial (IEC 60335 2-68); - aux appareils de nettoyage a haute pression (IEC 60335-2-79); - aux materiels de sablage (projection dabrasif); - aux outils electroportatifs et portables a moteur (serie IEC 60745, serie IEC 61029, serie IEC 62841); - aux machines destinees a etre utilisees dans des environnements corrosifs ou explosifs (poussiere, vapeur ou gaz); - aux machines destinees a etre utilisees dans des vehicules non ventiles; - aux machines destinees a etre utilisees a bord de navires ou davions. La presente partie 2 doit etre utilisee conjointement avec la derniere edition de lIEC 60335-1 et ses amendements sauf si cette edition lexclut. Dans ce cas, la derniere edition qui nexclut pas la presente partie 2 est utilisee. Elle a ete etablie sur la base de la sixieme edition (2020) de cette norme.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
