Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60494-1-ed.2.0
Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles
STANDARD published on 13.9.2013
The information about the standard:
Designation standards: IEC 60494-1-ed.2.0
Publication date standards: 13.9.2013
SKU: NS-410350
The number of pages: 58
Approximate weight : 174 g (0.38 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60494-1-ed.2.0 :
IEC 60494-1:2013 specifies the general assembly characteristics which are to be applied to pantographs, to enable current collection from the overhead contact line system. It also specifies the tests the pantographs have to perform, excluding insulators. The main technical changes with regard to the previous edition are as follows: - simplification and standardization of the tolerances for static contact force; - definition of a new investigation test "Measurement of mean static contact force at ambient temperature"; - deletion of combined test "Total contact force"; - definition of a new combined test "Check of operating system at maximum speed"; - new Annex "Static contact force tolerances in Japan". IEC 60494-1:2013 specifies the general assembly characteristics which are to be applied to pantographs, to enable current collection from the overhead contact line system. It also specifies the tests the pantographs have to perform, excluding insulators. The main technical changes with regard to the previous edition are as follows: - simplification and standardization of the tolerances for static contact force; - definition of a new investigation test "Measurement of mean static contact force at ambient temperature"; - deletion of combined test "Total contact force"; - definition of a new combined test "Check of operating system at maximum speed"; - new Annex "Static contact force tolerances in Japan".
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
