We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing
STANDARD published on 1.1.1987
Designation standards: IEC 60603-3-ed.1.0
Publication date standards: 1.1.1987
SKU: NS-410776
The number of pages: 33
Approximate weight : 99 g (0.22 lbs)
Country: International technical standard
Category: Technical standards IEC
Applies to a group of related rectangular, multicontact, two-part printed board connectors with male and female contacts in conjunction with either solder or solderless terminations (such as wrap type). All connectors have the same contact spacing using the basic grid of 2.54 mm (0.100 in). The attachment of the connector to the printed board is accomplished with a series of cantilever solder tabs, which are distributed evenly on both sides of the board. Applicable a un groupe de connecteurs rectangulaires apparentes, multicontacts, enfichables, pour cartes imprimees, equipes de contacts males et femelles, a sorties a souder ou a sorties pour connexions sans soudure (telles que connexions enroulees), Tous ces connecteurs sont au meme pas entre contacts suivant la grille de base 2,54 mm (0,100 in). La fixation du connecteur sur la carte imprimee est realisee par une serie de languettes a souder encastrees, qui sont reparties de maniere identique sur les deux faces de la carte.
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2025-05-05 (Number of items: 2 198 283)
© Copyright 2025 NORMSERVIS s.r.o.