Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60684-3-145-ed.1.0
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving
STANDARD published on 10.7.2001
The information about the standard:
Designation standards: IEC 60684-3-145-ed.1.0
Publication date standards: 10.7.2001
SKU: NS-410946
The number of pages: 15
Approximate weight : 45 g (0.10 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60684-3-145-ed.1.0 :
Gives the requirements for three types of non-heat-shrinkable sleeving, extruded from PTFE. Sleeving of this type is normally available with internal diameters up to 8,53 mm and in a range of wall thicknesses between 0,15 mm and 0,51 mm. This specification covers three levels of wall thickness: "thin wall", "standard wall" and "thick wall" related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage. Experience of product performance indicates that PTFE sleeving may be suitable for inclusion in systems for operation at temperatures up to 250 °C. Donne les prescriptions pour trois types de gaine en PTFE extrude, non thermoretractables. Les gaines de ce type sont generalement fournies avec des diametres interieurs allant jusqua 8,53 mm et dans des gammes depaisseur de paroi comprises entre 0,15 mm et 0,51 mm. Cette specification couvre trois niveaux depaisseur de paroi: «paroi mince», «paroi normale» et «paroi epaisse», selon le diametre interieur nominal et selon des prescriptions differentes correspondant a la tension de claquage. Lexperience concernant la qualite des produits indique que les gaines en PTFE peuvent etre adaptees a une utilisation dans les systeme fonctionnant avec des temperatures allant jusqua 250 °C.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
