Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60730-2-5-ed.4.0
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
STANDARD published on 19.11.2013
The information about the standard:
Designation standards: IEC 60730-2-5-ed.4.0
Publication date standards: 19.11.2013
SKU: NS-411172
The number of pages: 103
Approximate weight : 340 g (0.75 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60730-2-5-ed.4.0 :
IEC 60730-2-5:2013 applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles for household and similar use including heating, air conditioning and similar use. This part 2-5 is applicable to a complete burner control system and to a separate programming unit. This part 2-5 is also applicable to a separate electronic high-voltage ignition source and to a separate flame detector. Separate ignition devices (electrodes, pilot burners, etc.) are not covered by this part 2-5 unless they are submitted as part of a burner control system. Requirements for separate ignition transformers are contained in IEC 60989. Systems utilizing thermoelectric flame supervision are not covered by this part 2-5. This part 2-5 applies to the inherent safety, to the manufacturers declared operating values, operating times and operating sequences where such are associated with burner safety and to the testing of automatic electrical burner control systems used in, on, or in association with, burners. It was established on the basis of the fourth edition (2010) of that publication. Consideration may be given to future editions of, or amendments to, IEC 60730-1. The title of IEC 60730-2-5 Ed4.0 has been updated to the title of IEC 60730-1 Ed5.0. However, IEC 60730-2-5 Ed4.0 has not been updated in accordance with the technical requirements in IEC 60730-1 Ed5.0. This part 2-5 supplements or modifies the corresponding clauses in IEC 60730-1 so as to convert that publication into the IEC standard: Safety requirements for automatic electrical burner control systems. Key words: Automatic control, Burner control This publication is to be read in conjunction with IEC 60730-1:2013. The contents of the corrigendum of October 2023 have been included in this copy. La IEC 60730-2-5:2013 sapplique aux systemes de commande electrique automatiques de bruleurs pour la commande automatique de bruleurs pour fioul, gaz, charbon ou autres combustibles a usage domestique et analogue, y compris le chauffage, la climatisation et usages analogues. La presente partie 2-5 est applicable a un systeme complet de commande de bruleur et a une unite de programmation separee. La presente partie 2-5 est egalement applicable a une source electronique dallumage a haute tension separee et a un detecteur de flamme separe. Des dispositifs dallumage separes (electrodes, veilleuses de bruleur, etc.) ne sont pas couverts par la presente partie 2-5, a moins dy etre soumis en tant que partie dun systeme de commande de bruleur. Les exigences pour les transformateurs separes dallumage sont traitees dans la CEI 60989. Les systemes utilisant le controle thermoelectrique de flamme ne sont pas couverts par la presente partie 2-5. La presente partie 2-5 sapplique a la securite intrinseque, aux valeurs de fonctionnement, aux temps de fonctionnement et aux sequences de fonctionnement declares par le fabricant, dans la mesure ou ils interviennent dans la securite du bruleur, ainsi quaux essais des systemes de commande electrique automatiques de bruleurs utilises dans, sur, ou avec des bruleurs. Elle a ete etablie sur la base de la quatrieme edition (2010) de cette publication. Les editions futures de la CEI 60730-1, ou ses amendements, pourront etre pris en consideration. Le titre de la CEI 60730-2-5 Ed4.0 a ete mis a jour en fonction du titre de la CEI 60730-1 Ed5.0. Cependant, la CEI 60730-2-5 Ed4.0 na pas ete mise a jour conformement aux exigences techniques de la CEI 60730-1 Ed5.0. La presente partie 2-5 complete ou modifie les articles correspondants de la CEI 60730-1 de facon a la transformer en norme CEI: Exigences de securite pour les systemes de commande electrique automatiques des bruleurs. Mots-cles: commande automatique, commande de bruleur Cette publication doit etre lue conjointement avec la CEI 60730-1:2013. Le contenu du corrigendum doctobre 2023 a ete pris en consideration dans cet exemplaire.
These changes apply to this standard:
IEC 60730-2-5-ed.4.0/Amd.1
Change
Show all technical information.
Amendment 1 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
(Amendement 1 - Commandes electriques automatiques - Partie 2-5: Exigences particulieres pour les systemes de commande electrique automatique des bruleurs)
Change published on 31.8.2017
Selected format:Show all technical information.
IEC 60730-2-5-ed.4.0/Amd.2
Change
Show all technical information.
Amendment 2 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
(Amendement 2 - Dispositifs de commande electrique automatiques - Partie 2-5: Exigences particulieres pour les systemes de commande electrique automatiques des bruleurs)
Change published on 28.1.2021
Selected format:Show all technical information.
These corrections apply to this standard:
IEC 60730-2-5-ed.4.0/Cor.1
Correction
Show all technical information.
Corrigendum 1 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
(Corrigendum 1 - Dispositifs de commande electrique automatiques - Partie 2-5: Exigences particulieres pour les systemes de commande electrique automatiques des bruleurs)
Correction published on 16.10.2023
Selected format:Show all technical information.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
