Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60851-5-ed.4.0
Winding wires - Test methods - Part 5: Electrical properties
STANDARD published on 25.7.2008
The information about the standard:
Designation standards: IEC 60851-5-ed.4.0
Publication date standards: 25.7.2008
SKU: NS-411705
The number of pages: 53
Approximate weight : 159 g (0.35 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60851-5-ed.4.0 :
IEC 60851-5:2008 specifies the following tests: - Test 5: Electrical resistance; - Test 13: Breakdown voltage; - Test 14: Continuity of insulation; - Test 19: Dielectric dissipation factor. Significant revisions to the previous edition include the following points: - In Subclause 5.3, the addition of the use of carbon brush electrodes for the counting discontinuities during the high voltage continuity test, as an alternative to the V-groove pulley electrode; and - Clarifications in the breakdown voltage test for round wires larger than 2,500 mm and for fibrous covered wires. La CEI 60851-5:2008 donne les methodes dessai suivantes: - Essai 5: Resistance electrique; - Essai 13: Tension de claquage; - Essai 14: Continuite de lenveloppe isolante; - Essai 19: Facteur de dissipation dielectrique. Les modifications significatives par rapport a ledition precedente comprennent les points suivants: - Au Paragraphe 5.3, lajout de lutilisation des electrodes balais en carbone pour le comptage des discontinuites pendant lessai de continuite sous haute tension, comme alternative a lelectrode poulie ayant une gorge en forme de "V"; et - Des clarifications apportees a lessai de la tension de claquage pour les fils de section circulaire avec diametre nominal du conducteur superieur a 2,500 mm et pour les fils guipes de fibre.
These changes apply to this standard:
IEC 60851-5-ed.4.0/Amd.1
Change
Show all technical information.
Amendment 1 - Winding wires - Test methods - Part 5: Electrical properties
(Amendement 1 - Fils de bobinage - Methodes d´essai - Partie 5: Proprietes electriques)
Change published on 21.6.2011
Selected format:Show all technical information.
IEC 60851-5-ed.4.0/Amd.2
Change
Show all technical information.
Amendment 2 - Winding wires - Test methods - Part 5: Electrical properties
(Amendement 2 - Fils de bobinage - Methodes d´essai - Partie 5: Proprietes electriques)
Change published on 20.9.2019
Selected format:Show all technical information.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
