Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 61000-4-33-ed.1.0
Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters
STANDARD published on 27.9.2005
The information about the standard:
Designation standards: IEC 61000-4-33-ed.1.0
Publication date standards: 27.9.2005
SKU: NS-412155
The number of pages: 69
Approximate weight : 207 g (0.46 lbs)
Country: International technical standard
Category: Technical standards IEC
Annotation of standard text IEC 61000-4-33-ed.1.0 :
Provides a basic description of the methods and means (e.g., instrumentation) for measuring responses arising from high-power transient electromagnetic parameters. These responses can include: - the electric (E) and/or magnetic (H) fields (e.g., incident fields or incident plus scattered fields within a system under test); - the current I (e.g., induced by a transient field or within a system under test); - the voltage V (e.g., induced by a transient field or within a system under test); - the charge Q induced on a cable or other conductor. These measured quantities are generally complicated time-dependent waveforms, which can be described approximately by several scalar parameters, or "observables". These parameters include: - the peak amplitude of the response, - the waveform rise-time, - the pulse width, and - mathematically defined norms obtained from the waveform. This International Standard provides information on the measurement of these waveforms and on the mathematical determination of the characterizing parameters. It does not provide information on specific level requirements for testing. It has the status of a basic EMC publication in accordance with IEC Guide 107.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
