Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 61034-2-ed.3.0
Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
STANDARD published on 20.4.2005
The information about the standard:
Designation standards: IEC 61034-2-ed.3.0
Publication date standards: 20.4.2005
SKU: NS-412274
The number of pages: 31
Approximate weight : 93 g (0.21 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Ignitability and burning behaviour of materials and productsElectrical engineering in generalCables
Annotation of standard text IEC 61034-2-ed.3.0 :
Provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables burning under defined conditions. It describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommended requirements for evaluating test results. The principal changes with respect to the previous edition are as follows: a) inclusion of cables down to 1 mm diameter; b) inclusion of non-circular cables; c) addition of guidance on testing cables above 80 mm diameter; d) delineation of elements of the test report; e) addition of guidance on the calculation for other parameters for fire safety engineering purposes; f) removal of minor differences with equivalent CENELEC work to allow parallel voting with that body. Has the status of a group safety publication in accordance with IEC Guide 104. The contents of the corrigendum of September 2006 have been included in this copy. Fournit des details de la procedure dessai a employer pour la mesure de la densite des fumees emises par des cables brulant dans des conditions definies. Elle decrit les methodes de preparation et dassemblage des cables en essais, la methode dinflammation des cables, et donne des recommandations pour les exigences relatives a levaluation des resultats dessais. Les principales modifications par rapport a ledition precedente sont: a) lintroduction des cables de diametre allant jusqu a 1 mm; b) lintroduction des cables non circulaires; c) laddition dun guide sur les essais de cables de diametre superieur a 80 mm; d) la suppression delements du rapport dessai; e) lajout dun guide pour le calcul dautres parametres pour la conception de securite incendie; f) la suppression des petites differences par rapport aux travaux equivalents du CENELEC pour un vote parallele. Elle a le statut de publication groupee de securite, conformement au Guide 104 de la CEI. Le contenu du corrigendum de septembre 2006 a ete pris en consideration dans cet exemplaire.
These changes apply to this standard:
IEC 61034-2-ed.3.0/Amd.1
Change
Show all technical information.
Amendment 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
(Amendement 1 - Mesure de la densite de fumees degagees par des cables brulant dans des conditions definies - Partie 2: Procedure d´essai et exigences)
Change published on 27.6.2013
Selected format:Show all technical information.
IEC 61034-2-ed.3.0/Amd.2
Change
Show all technical information.
Amendment 2 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
(Amendement 2 - Mesure de la densite de fumees degagees par des cables brulant dans des conditions definies - Partie 2: Procedure d´essai et exigences)
Change published on 22.11.2019
Selected format:Show all technical information.
These corrections apply to this standard:
IEC 61034-2-ed.3.0/Cor.1
Correction
Show all technical information.
Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
(Corrigendum 1 - Mesure de la densite de fumees degagees par des cables brulant dans des conditions definies - Partie 2: Procedure d´essai et exigences)
Correction published on 21.9.2006
Selected format:Show all technical information.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
