Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 61290-3-3-ed.1.0
Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
STANDARD published on 7.11.2013
The information about the standard:
Designation standards: IEC 61290-3-3-ed.1.0
Publication date standards: 7.11.2013
SKU: NS-413011
The number of pages: 34
Approximate weight : 102 g (0.22 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 61290-3-3-ed.1.0 :
IEC 61290-3-3:2013 applies to all commercially available single channel optical amplifiers (OAs), including OAs using optically pumped fibres (OFAs) based on either rare-earth doped fibres or on the Raman effect, semiconductor optical amplifier modules (SOA modules) and planar optical waveguide amplifiers (POWAs). More specifically, it applies to single channel OAs placed before optical receivers, where there are no optical bandpass filtering elements placed between the OA and the receiver. The object of this part of IEC 61290-3 is to establish uniform requirements for accurate and reliable measurement of the ratio of the signal output power to the total ASE power generated by the OA in the optical bandwidth of the receiver. This quantity is a measure of the spontaneous-spontaneous beat noise at the receiver, and is correlated to the spontaneous-spontaneous noise factor of the OA, Fsp-sp, as defined in IEC 61290-3 and IEC 61291-1. Keywords: single channel optical amplifiers (OAs), semiconductor optical amplifier modules (SOA modules), planar optical waveguide amplifiers (POWAs), measurement of the ratio of the signal output power to the total ASE power generated by the OA in the optical bandwidth of the receiver La CEI 61290-3-3:2013 applique a tous les amplificateurs optiques (AO) monocanaux disponibles commercialement, y compris les AO utilisant des fibres pompees optiquement (OFA) basees soit sur des fibres dopees aux terres rares, soit sur leffet Raman, les amplificateurs optiques a semiconducteurs (AOS) et les amplificateurs optiques a guide donde planaire (POWA). Elle sapplique plus particulierement aux AO monocanaux places devant des recepteurs optiques, lorsquil ny a pas delement de filtrage optique passe bande place entre lAO et le recepteur. Lobjet de la presente partie de la CEI 61290-3 est de determiner des exigences uniformes de mesure precise et fiable du rapport de la puissance de sortie du signal sur la puissance totale demission spontanee amplifiee (ESA) generee par lAO (amplificateur optique) dans la bande passante optique du recepteur. Cette quantite est une mesure du bruit de battement spontane-spontane au niveau du recepteur et elle est correlee avec le facteur de bruit spontane-spontane de lAO, Fsp-sp, selon les definitions de la CEI 61290-3 et de la CEI 61291-1. Mots cles: amplificateurs optiques (AO) monocanaux, amplificateurs optiques a semiconducteurs (AOS), amplificateurs optiques a guide donde planaire (POWA), mesure pre du rapport de la puissance de sortie du signal sur la puissance totale demission spontanee amplifiee (ESA) generee par lAO (amplificateur optique) dans la bande passante optique du recepteur
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
