Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 61300-2-10-ed.3.0
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush and load resistance
Translate name
STANDARD published on 2.3.2021
The information about the standard:
Designation standards: IEC 61300-2-10-ed.3.0
Publication date standards: 2.3.2021
SKU: NS-1020003
The number of pages: 21
Approximate weight : 63 g (0.14 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 61300-2-10-ed.3.0 :
IEC 61300-2-10:2021 evaluates the effect of loads which is possible to occur when fibre optic devices are exposed to critical situations such as being stepped on, being run over by vehicle tyres, when an evenly-distributed static load is applied to the top surface of a street cabinet or when a load is applied to a street cabinets open door. This third edition cancels and replaces the second edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition: - addition of testing an evenly distributed static load applied on the top surface of a street cabinet; - addition of testing a static load applied to a street cabinet door; - addition of descriptions to perform the test at a specified temperature other as specified in the standard atmospheric conditions and addition of test temperature(s) in Table 1; - update of the severities according to IEC 61753-1:2018. LIEC 61300-2-10:2021 evalue les effets des charges susceptibles de se produire lorsque les dispositifs fibroniques sont exposes a des situations critiques telles que le pietinement ou l’ecrasement par des pneus de vehicules, lorsqu’une charge statique repartie uniformement est appliquee a la surface superieure d’une armoire d’environnement urbain ou lorsqu’une charge est appliquee sur la porte ouverte d’une armoire d’environnement urbain. Cette troisieme edition annule et remplace la deuxieme edition parue en 2012. Cette edition inclut les modifications techniques majeures suivantes par rapport a ledition precedente: - ajout d’un essai avec une charge statique repartie uniformement a la surface superieure d’une armoire d’environnement urbain; - ajout d’un essai avec une charge statique appliquee sur la porte d’une armoire d’environnement urbain; - ajout de descriptions pour effectuer lessai a une temperature specifiee autre que celle specifiee dans les conditions atmospheriques normales et ajout de la (des) temperature(s) dessai dans le Tableau 1; - mise a jour des severites conformement a l’IEC 61753-1:2018.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
