Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 61300-3-30-ed.3.0
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Endface geometry of rectangular ferrule
Translate name
STANDARD published on 27.7.2026
The information about the standard:
Designation standards: IEC 61300-3-30-ed.3.0
Publication date standards: 27.7.2026
SKU: NS-1278657
The number of pages: 21
Approximate weight : 63 g (0.14 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 61300-3-30-ed.3.0 :
IEC 61300-3-30 describes a method for measuring the endface geometry of rectangular multifibre ferrules having an IEC defined optical interface. The primary attributes are fibre position relative to the endface, endface angle relative to the guide holes, fibre tip radii and core dip for multimode fibres. This edition includes the following significant technical changes with respect to the previous edition: a) clarification of region diameter symbols; b) introduction of x116 and x132 region of interest (ROI) to support MT-16 and MT-32 ferrule types; c) preparation of geometry limit (GL) parameter tables for 16-, 24- and 32-fibre ferrules; d) clarification of the neighbouring fibres definition when computing adjacent height; e) improvement of figures in Annexes. L’IEC 61300-3-30:2026 decrit une methode de mesurage applicable a la geometrie de la surface de terminaison des ferules rectangulaires multifibres dont l’interface optique est definie par l’IEC. Les attributs primaires sont la position de la fibre par rapport a la surface de terminaison, l’angle de la surface de terminaison par rapport aux trous de guidage, les rayons des pointes des fibres et la depression du cour pour les fibres multimodales. Cette edition inclut les modifications techniques significatives suivantes par rapport a ledition precedente: a) clarification des symboles pour le diametre des differentes regions; b) introduction de la region dinteret (ROI, region of interest) x116 et x132 pour prendre en charge les types de ferules MT-16 et MT-32; c) preparation de tableaux de parametres de limite de geometrie (GL, geometry limit) pour les ferules a 16, 24 et 32 fibres; d) larification de la definition des fibres adjacentes pour le calcul du differentiel de hauteur entre fibres adjacentes; e) amelioration des figures des Annexes.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
