Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 61753-131-03-ed.1.0
Fibre optic interconnecting devices and passive components - Performance standard - Part 131-03: Single-mode mechanical fibre splice for category OP – Outdoor protected environment
Translate name
STANDARD published on 4.10.2021
The information about the standard:
Designation standards: IEC 61753-131-03-ed.1.0
Publication date standards: 4.10.2021
SKU: NS-1038862
The number of pages: 34
Approximate weight : 102 g (0.22 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 61753-131-03-ed.1.0 :
IEC 61753-131-03:2021 contains the minimum tests, test severities and measurement requirements which a mechanical fibre splice need to satisfy in order to be categorised as meeting the requirements of single-mode fibre splice for use in category OP (Outdoor protected) environments, as defined in IEC 61753-1. This document for mechanical splices defines the requirements for standard optical performance under a set of specified conditions. The standard contains a series or a set of tests and measurements with clearly stated conditions, severities and pass/fail criteria. The series of tests, commonly referred to as an operating service environment or performance category, is intended to be a basis to prove the product’s ability to satisfy the requirements of a specific application, market sector or user group. This first edition cancels and replaces IEC 61753-131-3 first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of definitions; b) addition of IEC 60068-2-10 mould growth test and test severities for materials; c) replacement of the IEC 61753 1:2007 category U tests and test severities by the IEC 61753-1:2018 category OP tests; d) addition of the requirement that dimensions are in accordance with IEC 61756-1; e) addition of the bending moment test; f) change of low temperature in cold test and change of temperature test to -25°C. If 40°C is required, the user can refer to category OP+. IEC 61753-131-03:2021 indique les exigences minimales relatives aux essais, aux severites des essais ainsi qu’aux mesurages auxquelles il est necessaire qu’une epissure mecanique de fibre satisfasse pour etre classee comme satisfaisant aux exigences des epissures de fibres unimodales destinees a etre utilisees dans des environnements de categorie exterieur protege (OP – Outdoor protected), tels qu’ils sont definis dans l’IEC 61753-1. Le present document applicable aux epissures mecaniques definit les exigences de performance optique normalisee selon un ensemble de conditions specifiees. La norme contient une serie ou un ensemble dessais et de mesurages dont les conditions, les severites et les criteres d’acceptation/de rejet sont clairement indiques. La serie dessais, a laquelle il est generalement fait reference en tant que categorie de performance ou denvironnement de service de fonctionnement, est destinee a servir de base pour demontrer la capacite du produit a satisfaire aux exigences dun secteur de marche, dun groupe dutilisateurs ou dune application specifique. Cette premiere edition annule et remplace l’IEC 61753-131-3 la premiere edition parue en 2010. Cette edition constitue une revision technique. Cette edition inclut les modifications techniques majeures suivantes par rapport a ledition precedente: a) ajout de definitions; b) ajout de l’IEC 60068-2-10 essai de moisissure et severite dessai pour les materiaux; c) remplacement des essais de categorie U de l’IEC 61753-1:2007 et de leurs severites par les essais de categorie OP de l’IEC 61753-1:2018; d) ajout de l’exigence de conformite des dimensions a l’IEC 61756-1; e) ajout de lessai de moment de flexion; f) modification de la temperature basse dans l’essai de froid et l’essai de variations de temperature a -25°C. Si 40°C est exige, l’utilisateur peut se reporter a la categorie OP+.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
